Novatel SMART-AG user manual Freset Target

Appendix B	Commands
B.2 FRESET	Clear Selected Data from NVM and Reset

The OEMV freset command is extended to include SMART-AG features. An additional target field, userdata (value = 10), resets only the SMART-AG user data NVM, thereby resetting all parameters indicated in this document as “Stored in NVM” to factory defaults. Issuing the freset command with the “target” field set to standard, resets the userdata NVM as well as OEMV parameters as indicated in the OEMV Family Firmware Reference Manual.

If you issue the FRESET command without any parameters, it is the same as issuing a FRESET STANDARD command.

Field		Field		ASCII	Binary		Description	Binary	Binary	Binary
		Type		Value	Value			Format	Bytes	Offset
1		FRESET		-	-		This field contains the command name	-	H	0
		header					or the message header depending on
							whether the command is abbreviated
							ASCII, ASCII or binary, respectively.
2		target		See Table 11			Data to be reset by the receiver	Enum	4	H
							Table 11: FRESET Target
	Binary			ASCII			Description
	0		STANDARD			Resets commands, ephemeris, and almanac (default). Also resets all L-
						band related data except for subscription information.
	1		COMMAND			Resets the stored commands (saved configuration)
	2		GPSALMANAC			Resets the stored GPS almanac
	3		GPSEPHEM			Resets the stored GPS ephemeris
	4		GLOEPHEM			Resets the stored GLONASS ephemeris
	5		MODEL			Resets the currently selected model
	10		USERDATA			Reset SMART-AG-only commands
	11		CLKCALIBRATION			Resets the parameters entered using the CLOCKCALIBRATE command
	20		SBASALMANAC			Resets the stored SBAS almanac
	21		LAST_POSITION			Resets the position using the last stored position
	31		GLOALMANAC			Resets the stored GLONASS almanac

58 SMART-AG User Manual Rev 2