Novatel SMART-AG user manual Appendix a

Page 50

Appendix A

Technical Specifications

A.1 Smart-AG Receiver Performance

PERFORMANCE (Subject To GPS System Characteristics)

Position Accuracy a

Standalone:

 

 

L1

1.8 m RMS

 

SBAS b

0.6 m RMS

 

DGPS

0.45 m RMS

 

RT-20

0.20 m RMS

 

Post Processed

5 mm + 1 ppm RMS

Time To First Fix

Hot: 35 s (Almanac and recent ephemeris saved and approximate position)

Warm: 40 s (Almanac, approximate position and time, no recent ephemeris)

 

 

Cold: 65 s (No almanac or ephemeris and no approximate position or time)

Reacquisition

0.5 s L1 (typical)

 

Data Rates

Raw

20 Hz

 

Measurements:

 

Computed

 

 

Position:

20 Hz

Time Accuracy a c

20 ns RMS

 

Velocity Accuracy

0.03 m/s RMS

 

Measurement Precision

C/A code phase

6 cm RMS

 

L1 carrier phase:

 

 

Differential

0.75 mm RMS

Dynamics

Velocity

515 m/s d

a.Typical values. Performance specifications are subject to GPS system characteristics, U.S. DOD operational degradation, ionospheric and tropospheric conditions, satellite geometry, baseline length and multipath effects.

b.GPS-only

c.Time accuracy does not include biases due to RF or antenna delay.

d.In accordance with export licensing.

50

SMART-AG User Manual Rev 2

Image 50
Contents SMART-AG User Manual Proprietary Notice PC Utilities Table of ContentsIntroduction Technical Specifications Tables Figures Software License Restrictions You may notSoftware License Warranty SMART-AGStandard Terms and Conditions of Sales Terms and Conditions Terms and Conditions FCC Notices Weee Notice Electromagnetic Compatibility EMC and SafetySMART-AG Regulatory Testing RoHS NoticeCustomer Service Oemv Firmware UpgradesForeword CongratulationsConventions Models and Features Chapter IntroductionModel Name Firmware Feature SMART-AG Controller ModelsAdditional Equipment Required Chapter Installation and SetupSMART-AG Setup SMART-AG Connector Pin-Out Simplified SMART-AG SetupMounting Bracket Installing the PC UtilitiesPower Supply Requirements Status Indicators Additional Features and InformationConnecting Data Communications Equipment Mounting the SMART-AGCan Setup SMART-AG LED Status IndicatorsNema Standards Available can Signals on the SMART-AGEmulated Radar ER Communications with the Receiver Serial Port Default SettingsChapter Operation Communicating with the Receiver Using CDU Communicating Using a Remote TerminalCommunicating Using a Personal Computer Getting StartedChapter Operation Transmitting and Receiving Corrections Basic Differential Setup DescriptionBase Station Configuration Log port message trigger periodRecommended Configuration Rover Station ConfigurationGPS + Glonass Base and Rover Configuration Configuration Notes Chapter Operation CDU/Convert Installation Chapter PC UtilitiesCDU PC Utilities Chapter Chapter Gdop Chapter Convert Rinex FormatChapter Convert Command Line Switches NovAtel Logs for Rinex ConversionFirmware Upgrades Upgrading Using the Auth CommandUpdating Using the WinLoad Utility Transferring Firmware FilesUsing the WinLoad Utility Open a File to Download Downloading firmware Upgrade Process Complete Appendix a SMART-AG Specifications Dimensions SMART-AG Power/Communications Development kit Cable Colour Signal Name Label SMART-AG Cable PinoutsSMART-AG Mating Connectors Recommended Fuse and Fuse Holders Fuse Recommended Fuse/Fuse HolderSMART-AG Commands in Alphabetical Order Appendix BFreset Freset TargetLOG Abbreviated Ascii SyntaxMessage ID Description Field Name Value Type Detailed Serial Port Identifiers THISPORT31 Radarcfg Mode Description Response ModesReset Appendix C SMART-AG Logs in Alphabetical OrderRadarsignal Position or Velocity Type Type binary Type Ascii DescriptionSolution Status PendingVersion HW & SW Versions and Serial Numbers Component TypeAppendix D Replacement Parts Index Index Log OM-20000123 Rev 2008/12/16