Ultimate Technology 600 POS manual 20 or, 21 or

Table 2. Local Mode Programming Instructions

* = Default Settings

Function Code(s)	Operation	Normal Indication	Remarks
20 or 30	1. Swipe	Program Card. While in programming	mode, at the Series 600 Keyboard
Comm (RS232)
	numeric keypad, enter Function Code 20 (Port 0) or 30 (Port 1).
Main Port 0 (20)
AUX Port 1 (30)	LED (2) turns on.
Baud Rate

2.At Series 600 Keyboard numeric keypad, enter the applicable number (1 through 9) to select baud rate per list below.

1	= 300	6	= 9600*
2	= 600	7	= 19200
3	= 1200	8	= 38400
4	= 2400	9	= 57600
5	= 4800

LED (2) turns off.

3.Program the next function code or exit programming mode by entering 99 on Series 600 Keyboard numeric keypad or by swiping the Program Card.

21 or 31	1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
Main Port 0 (21)
		numeric keypad, enter Function Code 21 (Port 0) or 31 (Port 1).
AUX Port 1 (31)
Stop Bits		LED (2) turns on.
	2.	At Series 600 Keyboard numeric keypad, enter the number of stop bits (1 or 2)per list
		below.
		1 = one stop bit
		2 = two stop bits*
		LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		600 Keyboard numeric keypad or by swiping the Program Card.

Series 600 POS Keyboard 19