Ultimate Technology 600 POS manual Cash Drawer Status

Table 2. Local Mode Programming Instructions

* = Default Settings

Function Code(s) Operation Normal Indication Remarks

451. Swipe Program Card. While in programming mode, at the Series 600 Keyboard

46	numeric keypad, enter applicable Function Code 45, 46, 47, or 48.
47	LED (2) flashes.
48
Drawer 1	2. At the auxiliary keyboard, type the desired key or type the desired key sequence.
Open (45)
	Note that the maximum number of key codes is limited to 24 – this is equivalent to
Closed (46)
	approximately 12 keystrokes.
Drawer (2)	If the Series 600 Keyboard beeps and
	LED (2) turns off while entering key
Open (47)
	codes at the auxiliary keyboard, you
Closed (48)
	have exceeded 24 key codes. Repeat
	steps 1 and 2.
	3. At the Series 600 Keyboard, press ENTER.
	LED (2) turns off.
	4. Program the next function code or exit programming mode by entering 99 on Series
	600 Keyboard numeric keypad or by swiping the Program Card.

491. Swipe Program Card. While in programming mode, at the Series 600 Keyboard

Poll	numeric keypad, enter Function Code 49.
Unsolicited	LED (2) turns on.
Cash Drawer Status

2.At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to select status method per list below.

0 = Send on change or transition

1 = Send only with poll command CDSTATUS

LED (2) turns off.

3.Program the next function code or exit programming mode by entering 99 on Series 600 keyboard numeric keypad or by swiping the Program Card.

Series 600 POS Keyboard 25