A C T I V E S T U D I O M O N I T O R S
Slave Monitor & Subwoofer
The slave unit is able to receive and distribute audio and control data via the proprietary TC LINK connection
The TS112 iDP™or TS212 iDP™subwoofer can be used in any iDP system.
Slave Monitor Network Connections
The Slave and Sub units contain one RJ45 Input connector and one Link connector. Via the RJ45 input connector the Slave unit is supplied with audio and control data from the Master unit. Audio signal from the source is fed to the master monitor only and the signal is distributed to the connected slave units through a proprietary networking protocol. A master monitor acts exactly the same as a Slave monitor when its TC Link button is set to the “IN” position, hence it is used for audio inputs only. The network system enables all connected monitors in a setup, whether in a stereo or surround format always to be corresponding. Control of the entire system is possible from one point on the network (Master or Slave), providing great flexibility in terms of control.
Initializing the Network
After connecting the units and powering up for the first time, the Master unit scans the setup in order to determine the number of monitors connected. Each monitor is recognized via a unique serial number but can be renamed according to task. After the initial scanning of the
Remote Control
Precision iDP™ monitor systems can be set up and controlled locally via the Master monitor’s
iDP SOFT™ - Software Remote
Parameters in the network including setup parameters can be controlled via iDP SOFT™ Additionally, any software upgrades which become available can be installed with this package.
Hardware Remote
This remote control allows access to three user defined Reference level settings, recall of up to four presets, mute/un- mute and solo function for each monitor, and Master level adjustment.
Precision iDP PC-iP™
Optional software dedicated for the Advanced Installer. In addition to the common parameters the
12