Tannoy ACTIVE STUDIO MONITORS owner manual Parameter Description, Main Display, † PC-iP

Parameter Description

Basic operation in all menus (when navigating the menus via the LCD display)

Use ARROW keys to select value or submenu

Use ENTER to enter menus or for confirmation, and to activate

Use EXIT to step to a higher level or to decline an operation

Values are marked with an “ * “ when they can be altered via the ARROW keys

Main Display

The Main Display indicates the position of the monitor (when set up) and the set volume for the monitor. A “+” symbol indicates that this specific Master Unit has been set up to act as System Controller.

Bass Management †

Bass management is possible in:

-Standard Stereo with 1 Sub

-Standard Stereo with 2 Subs

-All surround modes

The Precision monitors utilize 2nd order Hi Pass filters to attenuate frequencies below the set crossover frequency. The subwoofer utilises 4th order Low Pass filter to attenuate frequencies above the set crossover frequency.

Press ENTER to access the Select Mode

Off - Bass Management is not activated. Only the LFE channel is distributed to the Sub.
Available Crossover Frequencies:
Menu Name	Precision Filter	Sub 4th Order	Sub 2nd Order	LFE = Sub
X-Over 50 Hz	50Hz	50Hz	50Hz	No
X-Over 80 Hz	80Hz	80Hz	80Hz	No
Extension 50 Hz	Off	50Hz	50Hz	No
Extension 80 Hz	Off	80Hz	80Hz	No
THX Sim 80 Hz	80Hz	80Hz	Off	Yes
Small Cons 120 Hz ††	120Hz	120Hz	80Hz	Yes

† PC-iP

Via the iDP PC-iP™installer package (optional software for the advanced installer) an advanced Bass Management mode is available. In this mode a greater number of frequencies can be chosen, and all filters (Precision HPF, Sub 4th order and Sub 2nd order) can be controlled to suit demanding & critical setups.

†† Small Cons - Small Consumer (filter to mimic a small consumer speaker)

27