Tannoy ACTIVE STUDIO MONITORS owner manual Technical Specifications TS212 iDP Subwoofer

Page 45

Technical Specifications - TS212 iDP& TS112 iDPSubwoofer & iDPRemote

Technical Specifications

TS212 iDP™ Subwoofer

System

Active Subwoofer

Frequency Response

25Hz – 150Hz (+/- 3dB)

Max. SPL (@ 1m)

124dB (continuous)

Crossover Frequency

Set in bass management (DSP Generated)

Drive units

2 x 300mm (12") Aluminium Cone

Cabinet Volume/LF Alignment

45 Litres/Infinite baffle

Dimensions (H x W x D)

520mm x 471mm x 497mm

 

(201/2” x 185/8” x 195/8”)

Cabinet Construction

MDF

 

Gray suede paint finish on top with silver insert

 

Black Fabric on sides

 

Black anodised aluminium back plate

Total weight

51kg (112.2lbs)

Electronic System

 

Mains Voltage

115 or 230Vac, 50 – 60Hz (switchable)

Power Consumption

45W @ 1/8 Full Power (IEC 60065)

Amplifier

1500 W PWM amp

System Sample Rates:

 

Internal

96 kHz (except when slaved to digital input

 

or word clock input)

External

96, 88.2, 64, 48, 44.1 or 32 kHz

 

(optional 192kHz)

Digital Section (Slave only):

 

I/O connectors

2 x RJ45 proprietary TC LINK

Dynamic Range

> 113 dB typ. (unweighted)

THD+N

< -105 dB typ. @ 1 kHz, -3 dBFS

Cross-talk

< -120 dB

A to D Conversion

24 bit (Dual bit delta sigma sampling at

 

4.1/5.6/6.1/6.1 MHz)

TS112 iDP™ Subwoofer & iDP™

Active Subwoofer 25Hz – 150Hz (+/- 3dB) 118dB (continuous)

Set in bass management (DSP Generated) 1 x 300mm (12") Aluminium Cone

22 Litres/Infinite baffle 384mm x 366mm x 398mm (151/8” x 143/8” x 155/8”)

MDF

Gray suede paint finish.

Black anodised aluminium back plate.

25kg (55lbs)

115 or 230Vac, 50 – 60Hz (switchable)

45W @ 1/8 Full Power (IEC 60065)

750 W PWM amp

96 kHz (except when slaved to digital input or word clock Input)

96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz)

2 x RJ45 proprietary TC LINK > 113 dB typ. (unweighted)

<-105 dB typ. @ 1 kHz, -3 dBFS

<-120 dB

24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)

45

Image 45
Contents Owners M a N U a L Page Important Safety Instructions Important Safety Instructions Quick Setup Guide T I V E S T U D I O M O N I T O R S Introduction Tannoy Dual Concentric Concept & Design PhilosophyHigh efficiency compact Switched Mode Power Supply Smps Unpacking & Visual ChecksTannoy WideBand SuperTweeter Speaker Placement Preliminary RecommendationOrientation Master & Slave Concept Slave Monitor & Subwoofer Remote ControlInitializing the Network IDP Soft Software RemoteSlave/Subwoofer Master UnitSUB IDP Display Master General Setup ProcedureSetups General Setup ProcedureAnalog Stereo Set-up With Mono Subs Stereo Digital Set-up With Mono Subs Analog Stereo Set-up With Stereo SubsDigital Set-up Analog Set-upDigital 192kHz Set-up Digital Set-up Analog Set-up Analog, Digital& 192kHz Alternative 7.1 Set-upConnecting Three Subs Connecting Two SubsStereo Set-up With Chains on L&R. Analog or Digital Dig/6 MasterSetup when the monitors are connected Reset All Settings Reset ProcedureSelect Setup Select Monitor TasksParameter Description Press Enter to access the Select ModeMain Display † PC-iPBass Management PhaseLFE Low Pass Filter LFE GainSetup Setup MenuSet Monitor Task External ClockLFE channel important Parameters available for the subwooferParameter Categories IDP Remote Volume potentiometer Preset 1/3 and 2/4 keysREF Level keys MUTE/UNMUTE Solo keys for the channels R LS- SUB RSInstallation on Mac Installation on PCIDP Soft Minimum requirementsREF LEV. keys Volume ControlMonitor and Sub icons Bass Mgt Bass ManagementRecall presets IDP Soft Preset ListStore presets Locked symbol in Preset ListUpload Software to Monitors IDP Soft NetworkSystem Setup Configuration Analog GainBNC Sync Calibrate Main Monitors Monitor AssignmentCalibrate Subwoofer Phase Range LFE Gain Range 0 to 14dBLFE Low Pass Filter Chained monitors System Master & Slaves Technical Specifications Precision 6 iDPTechnical Specifications- Precision 8 iDP TS112 iDP Subwoofer & iDP Technical Specifications TS212 iDP SubwooferDimensions Precision 6 iDP Dimensions Precision 8 iDP Dimensions Precision TS112 iDP Grey Dimensions Precision TS212 iDP Grey/SilverIDP Display Messages Curves Explained System Delays Sample Rate Digital Input Analog InputSUB LFE TC Link Standard Cat-5 cables CablesAES/EBU Standard cables Serial to Cat-5 cableDeclaration Of Conformity Warranty Page Issue Software Version 1.53 Part No GH 01 December