Tannoy ACTIVE STUDIO MONITORS owner manual Technical Specifications- Precision 8 iDP

A C T I V E S T U D I O M O N I T O R S

Technical Specifications- Precision 8 iDP

System (Master & Slaves)
System	3-Way semi-active near field monitor
Frequency Response (1)	43Hz – 51kHz (+/- 2dB)
Max. SPL (@ 1m) (2)	120dB (continuous)
Dispersion (-6dB)	90 degrees
Crossover Frequency	1.7kHz (DSP generated) & 16kHz (passive)
Drive units	200mm (8") Tannoy Dual Concentric™ constant directivity driver with
	multiple fibre paper pulp cone.
	25mm (1") titanium dome Wideband™ SuperTweeter™,
	Neodymium magnet system
Cabinet LF Alignment	Optimised bass reflex loaded
Dimensions (H x W x D)	440mm x 272mm x 369mm (173/8” x 103/4” x 141/2”)
Cabinet Construction	MDF cabinet and front baffle, tongue and groove front and back
	Black cabinet grey painted baffle with brushed aluminium inlay
	Black anodized aluminum back plate
Total weight	17 kg (37.4lbs)
Electronic System
Mains Voltage	100 to 240Vac, 50 – 60Hz (auto – select)
Power Consumption	45W @ 1/8 full power (IEC 6065)
Amplifier	Bass/midrange – 200 Watts Class D
	Tweeter & SuperTweeter™ 200 Watts Class D
System Sample Rates:
Internal	96 kHz (except when slaved to digital input or word clock input)
External	96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz)
Digital Section (Master only):
I/O connectors	XLR (2 channels AES/EBU in). 3 x RJ45 proprietary TC LINK
Formats	AES\EBU
Word clock	Input BNC, 75 , 0.6 to 10 Vpp
Display	2 x 16 character dot matrix
Operation	Menu system / four buttons
Analogue Section (Master only):
Input connectors	XLR balanced (pin 2+, pin 3-)
Impedance	10/3 k (balanced/unbalanced)
Selectable Full Scale Input Level	+9, +15, +21, +27 dBu
Dynamic Range	> 113 dB typ. (unweighted), BW: 20-20kHz
THD+N	< -105 dB typ. @ 1 kHz, -3 dBFS
Cross-talk	< -120 dB, 20 Hz to 20 kHz
A to D Conversion	24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1MHz)
Slaves Only:
I/O connector’s	2-x RJ45 proprietary TC LINK

The typical listening distance for Precision 8 iDP is 1.3 -2.8 m

The typical room size for Precision 8 iDP is 50-100 m3

NOTES

(1)+/- 3 dB, measured at 1m in an anechoic chamber. (2) Peak SPL at mix position for 1 pair driven.

Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.

44