American Power Conversion SYMINIF-PD, SYMSTRF PowerView LEDs, Color Description, Navigation Keys

Chapter 6 - The PowerView Display

PowerView LED's

Four LED indicators report the operational status of the Power Array. Table 6-1 describes the function of each of the LED indicators.

LED	Color	Description
LOAD	Green	Indicates normal, on-
ON		line operating
		condition. The Power
		Array is on, is
		receiving power from
		the utility, and is
		supplying clean,
		conditioned power to
		the load.
ON	Yellow	Indicates that a utility
BATT		power failure has
		occured, and that
		power to the attached
		load is being supplied
		by the battery
		modules.
BYPASS	Yellow	Indicates that power
		to the load is being
		supplied directly from
		the power utility. The
		Power Array has been
		effectively removed
		from the circuit.
FAULT	Red	Indicates that the
		Power Array has
		detected an internal
		fault condition. An
		alarm message will
		appear on the
		PowerView display.
		(See Chapter 9 for
		appropriate corrective
		action.)

Table 6-1Power Array Display LEDs

Navigation Keys

The four navigation keys located on the front of the Powerview interface are used to move through the screen menus, select menu items, and to either access information, or change sys- tem parameters. A small arrow at the left side of the display screen indicates which menu item or parameter is selected. The navigation keys are described in Table 6-2.

Table 6-2Navigation Keys Descriptions

6-2