APC 6739380EN/JC Options, LED signalling box, Media Contacts 15 additional auxiliary transmission

Page 47

"LED" signalling box


Fonctionneme	nt sur batterie
Préalarme fin d'au		to.batterie	test
Préalarme fin d'au			test
Onduleur à l'arrêt
Alarme globale

Options

This unit remotes the basic elements of		Used for basic remote monitoring, it
information on system status:		includes a buzzer with a reset button
◗	load on battery;	and an indication light test button.
◗ low battery shutdown warning;		It is also equipped with a battery to
◗	inverter stop;	ensure correct operation in the event of
◗	general alarm.	a power supply problem.

"Media Contacts 15" additional auxiliary transmission

XR8 XR9 XR5 XR6 XR7

An additional board may be installed on all types of devices for the reception of additional environment information and the transmission of additional information on the device status.

For further details on the information received and transmitted, see the "Environment information" section). The position of the board is indicated in figures 18, 19, 20, 21 and 23.

"Tele-Monitor" remote indications unit

This unit is the remote version of the optional alphanumeric display installed on the UPS or Static Switch Cubicles. It offers the same functions (see the "Monitor alphanumeric display" section).

Two units may be remotely installed, in which case:

◗ one unit is the master with all the indications and control functions;

◗ the other is the slave with only indications functions.

"GTC link" communications system

The "GTC link" is a communications system comprising both hardware and software for transmission to a computer system, such as a Building and Energy Management (BEM) system, of information on the

MGETM GalaxyTM 6000 operating status and reception of the On/off and self-test remote controls.

6739380EN/JC - Page 47

Image 47

Contents Mgetm GalaxyTM 2 6739380EN/JC Contents Options System may also include IntroductionSystem performance System descriptionUp to 4 UPS identical ratings can be parallel-connected Different types of MGETMGalaxyTM 6000 systemsFrequency converter with battery backup power figure UPS or converter cubicles Static Switch CubicleIsolation and protection devices Operation with Mains 1 down Main operating modesNormal operation Battery charge cycle Battery timeOperation with Mains 1 restored UPS shutdown or overload Installation with an engine generator setExample of an installation with an engine generator set Overload curve Output voltage quality and continuityFrequency converters without redundancy Frequency converters with redundancy450 to 500kVA UPS or frequency converter Description of MGETMGalaxyTM 6000 cubiclesInverter cubicle 250 to 400kVA UPS or frequency converterFor a 250 to 300kVA UPS Battery cubicleKVA UPS External maintenance bypass cubicle Static Switch CubicleMgetm GalaxyTM 6000 control panel Visible control panel Static Switch CubicleControl panel Visible control panelLoad protected light Buzzer Operating problem lightBattery operation light Load not protected lightHidden control panel Light I battery discharged Light F battery temperature outside tolerancesLight G battery charging Light H inverter faultMulti-bypass modular UPS Start-upSystem start-up Single-unit or modular UPSGalaxy UPS Modular UPS with external maintenance bypassStart-up of a rectifier/charger Parallel UPS systems with a Static Switch CubicleStart-up of a unit Frequency convertersFrequency converter or multi-bypass UPS Frequency converter without a batteryStart-up of an inverter Single-unit or modular UPS systemShutdown of an rectifier/charger ShutdownShutdown of a unit Shutdown of an inverterModular UPS External maintenance bypassSystem shutdown Single-unit or single modularWith Mains Buzzer resetParallel UPSs with SSC No MainsMaintenance bypass AlarmsStandard information Media Contacts Signal receptionSignal transmission Environment informationAdditional remote transmission board LED signalling box optionalAdditional information Media Contacts 15 optional 30 6739380EN/JC Single-unit or single modular UPS figure MaintenanceMaintenance configuration Isolate the UPSs Frequency converter or parallel UPS with SSCVented lead-acid batteries Battery maintenanceFunctional check AutodiagnosticsVisual check Training centers Display Monitor alphanumeric displayGeneral Red lights Lights 1 toGreen lights Display of alarms Alarm display and buzzer resetList of general alarms Mains 2 Problem Check Frequency List of secondary alarmsBattery is currently being recharged Measurement system Display of current measurements Voltage measurementsCurrent measurements Display of voltage measurementsDisplay of battery measurements Frequency and power measurementsBattery measurements Display of power and frequency measurements Battery test see figure opposite Display of the settings selection screens Inverter On/Off commandsLanguage, display contrast and buzzer volume settings Display for the inverter On/Off commandsDisplay system configuration Display system configurationTele-Monitor remote indications unit LED signalling boxOptions Media Contacts 15 additional auxiliary transmissionRemote vision display Harmonics filter and power factor improvementVision display Mgetm GalaxyTM 6000UPSs standard input rectifier-charger Battery Temperature MonitorDouble bridge rectifier-charger Empty cubicles50 6739380EN/JC