AGFA Printer manual Anapurna UV Curable Ink, General information, Color gamut, Packing

Page 9

:ANAPURNA L/XL

OPERATOR MANUAL

4. :Anapurna UV Curable Ink.

4.1.General information

-The :Anapurna UV curable ink is specially developed for best performance on the :Anapurna engine.

-Sharp printing, vibrant colors on a wide range of media

-Ensures dry and instant ready prints with excellent outdoor durability

-Use of light inks

•Enhance apparent output resolution by using Light Cyan and Light Magenta

•Results in smooth highlights

-Ink usage: ± 10ml/m², all colors together (6)

4.2.Color gamut

-Agfa Inks tuned towards the ISO Standard 12647 (2004)

-Calculated nr of colors (Volume calculated within Monaco CMS)

-ISO Standard 12647: 770.000 colors

-:Anapurna Ink on :Anapurna printing in:

»6 pass : 830.000 colors

»8 pass : 850.000 colors

»12 pass : 1.080.000 colors

»16 pass :

4.3. Packing

- 1L bottle, packed per 2

:Anapurna Cyan

:Anapurna Magenta

:Anapurna Light Cyan

:Anapurna Light Magenta

:Anapurna Yellow

:Anapurna White

:Anapurna Black

:Anapurna Cleaning Solution

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]9]8/09/2006]

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
Anapurna L/XL Table of Contents Safety Instructions System Dimensions Printer Overview and FeaturesFront view, parts & locations Rear view, parts & locations Cover Open Sensor Head Carriage view, parts Signal tower Color Sequence Head technologyGeneral information Anapurna UV Curable InkColor gamut PackingMain ink tanks Ink CircuitAuto ink supply Sub Ink TankRead out How to make changes 2-Way valves Ink supply by means of negative pressure Printing headsEncoder Test can be found in the Test menu Waste Tank Ink Refill System what can go wrong…Settings in software Curing setup and sequencesLamp Type Cure Default, Set or Both UV Curing SystemUni- and Bi-directional printing By default, Full power should be used whenever possibleBelt Tension control Printing TableReplacement of Conveyor belt MaintenanceDaily Maintenance Nozzle check/purge MaintenanceLittle purge Cleaning the failing heads Engine Storage AT the END of the Week Weekly MaintenanceEngine is NOW Ready for a Long Stand Still Long Stand StillEngine is NOW Ready to Print Again Media Setup Roll to RollAuto Feed System Take-Up Motor Box Rigid Support tables Rigid MediaAB298/09/2006 Head Base Height Control Automatic Head Base Height SetupMm Gap Control Program Menu Anapurna Control ProgramDisplay Printing Progress Set Top forward and Left MarginSetup Parameter Menu Good AB358/09/2006 AB368/09/2006 Test Menu Carriage will move slowly back to the Home position To end this test, select Reset Test in the same menu,Preparing an image Printing an imagePreparing the Anapurna Carriage must be moved to the home position firstPrinting the image Cancel a print While printing, press S and Y, the print is then cancelledPurge function on the printing Printing on heat sensitive media Tips & TricksMedia corners lift a bit up rigid media Image size/border Wasatch Rip