AGFA Printer manual Setup Parameter Menu

:ANAPURNA L/XL OPERATOR MANUAL

11.2. Setup Parameter Menu

General info: At first, you always have to OPEN a specific “.dat”-file, in which all engine parameters are defined, such as the UV-settings, Carriage speed, Bi-Dir alignment, Step size, etc.

The .dat-files are best named after the Carriage Speed and head height. (e.g.: s-1250_2mm_flex.dat)

It’s best to make a new .dat –file for every different head height, also make a different for flexible and rigid media.

After changing a value: use the “Save as” button and create a

new .dat-file, or overwrite the old.

Changes on Parameters, marked with an “”, require a “Parameter Download” in the TEST menu.

11.2.1. Bi-Dir Alignment:

This only applies to Bi-directional printing!

You can change the value when you see that the drops are deviated from their correct position. When printing Bi-di, the dots must be aligned and need to be jetted to the same position, printing from right-to-left, and when printing from left-to-right. A deviated Bi-Dir alignment will show as un-sharp text and blurry images.

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]33]8/09/2006]