AGFA Printer manual AB358/09/2006

:ANAPURNA L/XL OPERATOR MANUAL

11.2.2. Step Size:

The Step Size is also known as “Media Feed”.

You can visually see on a printed image if you have to adjust the Step Size.

(A) Dark lines in the print, as a result of overlapping passes.

Increase the Step Size value from: e.g.: 51660 to 51680

(B) White lines in the print, as a result of a gap between the passes.

Decrease the Step Size value from: e.g.: 51660 to 51640

After changing the value, use “Save as”, and overwrite the existing .dat-file. In the TEST menu, select “Parameter Download”, click on TEST.

Now, the new value will be active.

11.2.3. Carriage Speed:

The engine has got 3 pre-defined Carriage speeds: 900, 1250 and 1525.

These speeds are continuously variable. We consider 1250 as the default speed. When printing Uni-directional with 1250, the printing speed is 1250, and the returning speed (to home) is, by default set to 2000.

As a result, you don’t loose half your Bi-dir speed when printing Uni.

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]35]8/09/2006]