Toshiba BSX5TTS22QMR, BSX5TTS25QMR manual Product Overview, Introduction Features Unpacking

1. PRODUCT OVERVIEW

ENGLISH VERSION EO1-33059

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TOSHIBA B-SX5T series thermal printer. This Owner’s Manual contains from general set-up through how to confirm the printer operation using a test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features

1.3 Unpacking

NOTES:

1.Check for damage or scratches on the printer. However, please note that TOSHIBA TEC shall have no liability for any damage of any kind sustained during transportation of the product.

2.Keep the cartons and pads for future transportation of the printer.

This printer has the following features:

•The print head block can be opened providing smooth loading of media and ribbon.

•Various kinds of media can be used as the media sensors can be moved from the centre to the left edge of the media.

•The strip module, ribbon saving module, and expansion I/O interface board are provided on this printer as standard.

•When the optional interface board is installed, Web functions such as remote maintenance and other advanced network features are available.

•Superior hardware, including the specially developed 12 dots/mm (306 dots/inch) thermal print head which will allow very clear print at a printing speed of 76.2 mm/sec. (3 inches/sec.), 127.0 mm/sec. (5 inches/sec.), or 203.2 mm/sec. (8 inches/sec.).

•Besides the optional Cutter Module, there are also an optional PCMCIA Interface Board, LAN Interface Board, Wireless LAN Board, the USB Interface Board, the RFID module, and the Fanfold Paper Guide Module.

Unpack the printer as per the Unpacking Instructions supplied with the printer.

E1- 1