Toshiba B-SX5T-TS22-QM-R, BSX5TTS25QMR, BSX5TTS22QMR, B-SX5T-TS25-QM-R manual Control Code Selection

2. PRINTER SETUP

ENGLISH VERSION EO1-33059

2.9 Setting an Operating Environment

2.9.1Parameter Setting (Cont.)

(13) Control Code Selection

This parameter is to choose a Control Code.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET CODE AUTO

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

CODE AUTO

CODE ESC,LF,NUL

CODE{}

CODE MANUAL

Automatic selection

Manual selection

Manual selection

Control codes should be specified.

When “CODE MANUAL” is selected and the [PAUSE] key is pressed, the LCD display will show the setting screen of CONTROL CODE1 to CONTROL CODE3 as follows.

<2>PARAMETER SET CONTROL CODE1 1B

		CONTROL CODE1 FF
[RESTART]		CONTROL CODE1 FE
		CONTROL CODE1 FD
	[FEED]	CONTROL CODE1 02
		CONTROL CODE1 01
		CONTROL CODE1 00

After setting the control code for Control Code 1, press the [PAUSE] key to show the CONTROL CODE2 screen. In a same manner, press the [PAUSE] key after setting the control code for Control Code 2 to display the CONTROL CODE3 screen.

CONTROL CODE1

[PAUSE]

CONTROL CODE2

[PAUSE]

CONTROL CODE3

Press the [PAUSE] key after setting the control code for Control Code 3, and the Strip Wait Status Selection screen will appear.

E2-23