Toshiba G8000 Series Keep the specified clearance around the UPS, Keep the UPS room clean

Page 11

 

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

Keep the specified clearance around the UPS.

 

 

 

Leaving no space makes it difficult to carry out maintenance,

 

 

 

 

 

 

inspections, causes insufficient ventilation, and cooling leading to

 

 

 

malfunctions.

 

 

 

MANDATORY

Keep the UPS room clean.

Use a vacuum cleaner to clean the UPS.

Also, Do NOT use silicon-contained waxes on the floor in the UPS room and in the related room as this may cause static electricity.

MANDATORY

Make sure the air vents on the front and top of the UPS are NOT blocked

Blocking the vents will cause the temperature inside the UPS to rise and may result in fire or UPS faults.

PROHIBITED

Do NOT install the UPS close to a water source.

It may cause electrical shock, UPS fault, or other accidents.

PROHIBITED

Please ask Toshiba or authorized representatives where the UPS and/or components are to be disposed.

It is illegal to dispose of certain components without conforming to environmental regulation for industrial/commercial waste.

MANDATORY

10

Image 11
Contents Document Number February Introduction Uninterruptible Power Supply Contacting Toshiba’s Customer Support Center Manual’s Purpose and ScopeGeneral Safety Instructions Important Safety Instructions Safety Precautions Prohibited General Terms Do not remove the rear/side panelsAvoid vibration or shock exceeding 0.5G to the UPS Installation PrecautionsUPS Installation Environment Standard Keep the specified clearance around the UPS Keep the UPS room cleanDo not install the UPS close to a water source Mandatory Connect ground wire to the earth ground terminal onlyLocations of the Warning Labels 100/125 kVA Locations of the Warning Labels 150/180/225 kVA AC Input Grounding Electrode Terminal Contents 100/125kVA UPS Exterior dimensions front & right side Dimensions and Weight150/180/225kVA UPS Exterior dimensions front & right side 250/300kVA UPS Exterior dimensions front & right side Transportation by a crane TransportationAvoid vibration or shock exceeding 0.5 G to the UPS Do not expose the UPS to waterAngle more than Transportation by a forklift Storage Ensure that there is adequate working space around InstallationUPS Clearance UnpackingPoints to be observed Anchor bolt tightening Anchor boltsOverview External Wiring DiagramPhase 3-wire Phase 4-wire Terminal Blocks and Power CablesRecommended Cable Size and Tightening Torque for 125kVA UPS Recommended Cable Size and Tightening Torque for 180kVA UPS Phase 3-wire Phase 4-wire Recommended Cable Size and Tightening Torque for 250kVA UPS Ilsco External Breaker Rating External Breakers100~225kVA 250/300kVA Grounding Wire10 External Connections Control WiresRecommended configuration with input neutral grounded Grounding configurationRecommended configuration with delta-input Grounding configuration without input neutral12 Grounding configuration with corner-grounded delta-input Grounding configuration with corner-grounded delta-input
Related manuals
Manual 63 pages 16.31 Kb