Toshiba G8000 Series installation manual Safety Precautions

Page 7

4.Safety Precautions

Application

The UPS shall NOT be applied to support equipment (*) that could affect the human lives.

Special considerations are required when applying this UPS to the equipment (**) that affect human safety and/or maintain public services.

Be sure to contact/inform Toshiba if it is such a case. The application without special consideration may cause serious accidents.

*Medical operation room equipment

Life support equipment (artificial dialysis, incubators, etc.)

Toxic gas or smoke eliminators

Equipment that must be provided under fire laws, construction standards or other ordinances

Equipment equivalent to the above

**Equipment to supervise or control airways, railways, roads, sea-lanes or other transportation.

Equipment in nuclear power plants.

Equipment to control communications.

Equipment equivalent/similar to the above mentioned.

Disclaimer

In no event will Toshiba Corporation be responsible or liable for either indirect or consequential damage or injury that may come from the use of this equipment.

Any modifications without authorization by Toshiba could result in personal injuries, death or destruction of the UPS.

Warning Labels Check

Make sure all the warning labels are accordingly placed in the appropriate locations (see page 10~13).

If a label is missing or illegible, contact Toshiba or authorized representatives.

6

Image 7
Contents Document Number February Introduction Uninterruptible Power Supply Contacting Toshiba’s Customer Support Center Manual’s Purpose and ScopeGeneral Safety Instructions Important Safety Instructions Safety Precautions Prohibited General Terms Do not remove the rear/side panelsAvoid vibration or shock exceeding 0.5G to the UPS Installation PrecautionsUPS Installation Environment Standard Do not install the UPS close to a water source Keep the UPS room cleanKeep the specified clearance around the UPS Mandatory Connect ground wire to the earth ground terminal onlyLocations of the Warning Labels 100/125 kVA Locations of the Warning Labels 150/180/225 kVA AC Input Grounding Electrode Terminal Contents 100/125kVA UPS Exterior dimensions front & right side Dimensions and Weight150/180/225kVA UPS Exterior dimensions front & right side 250/300kVA UPS Exterior dimensions front & right side Transportation by a crane TransportationAvoid vibration or shock exceeding 0.5 G to the UPS Do not expose the UPS to waterAngle more than Transportation by a forklift Storage Ensure that there is adequate working space around InstallationPoints to be observed UnpackingUPS Clearance Anchor bolt tightening Anchor boltsOverview External Wiring DiagramPhase 3-wire Phase 4-wire Terminal Blocks and Power CablesRecommended Cable Size and Tightening Torque for 125kVA UPS Recommended Cable Size and Tightening Torque for 180kVA UPS Phase 3-wire Phase 4-wire Recommended Cable Size and Tightening Torque for 250kVA UPS Ilsco External Breaker Rating External Breakers100~225kVA 250/300kVA Grounding Wire10 External Connections Control WiresRecommended configuration with input neutral grounded Grounding configurationRecommended configuration with delta-input Grounding configuration without input neutral12 Grounding configuration with corner-grounded delta-input Grounding configuration with corner-grounded delta-input
Related manuals
Manual 63 pages 16.31 Kb