Toshiba G8000 Series General Terms Do not remove the rear/side panels, Prohibited

Page 8

General Terms

WARNING

Do NOT remove the rear/side panels.

The parts inside carry energy-high current. That may result in electric shock, burns, personal injuries or UPS faults by removing these panels.

PROHIBITED

Do NOT modify the UPS, relocate after initial installation or replace parts by untrained personnel.

Electrical shock, injury or UPS faults may result if non-certified technicians attempt to modify or relocate the UPS.

Please contact Toshiba if you need UPS modifications or plan

 

to move the UPS.

PROHIBITED

Transportation

WARNING

When moving the UPS using a crane, follow the specified work procedure (*) and keep the suspension wire angle within 60°.

Moving the UPS by any method other than that specified may cause personal injury by being crushed or trapped by the UPS when it falls or overturns.

* As per specification in chapter 8.

MANDATORY

When moving the UPS, do NOT tilt the UPS more than 10° from upright.

Titling the UPS more than 10° may cause personal injury by being crushed or trapped by the UPS when it falls or overturns.

MANDATORY

7

Image 8
Contents Document Number February Introduction Uninterruptible Power Supply Manual’s Purpose and Scope Contacting Toshiba’s Customer Support CenterGeneral Safety Instructions Important Safety Instructions Safety Precautions General Terms Do not remove the rear/side panels ProhibitedInstallation Precautions Avoid vibration or shock exceeding 0.5G to the UPSUPS Installation Environment Standard Keep the specified clearance around the UPS Keep the UPS room cleanDo not install the UPS close to a water source Connect ground wire to the earth ground terminal only MandatoryLocations of the Warning Labels 100/125 kVA Locations of the Warning Labels 150/180/225 kVA AC Input Grounding Electrode Terminal Contents Dimensions and Weight 100/125kVA UPS Exterior dimensions front & right side150/180/225kVA UPS Exterior dimensions front & right side 250/300kVA UPS Exterior dimensions front & right side Transportation Avoid vibration or shock exceeding 0.5 G to the UPSDo not expose the UPS to water Transportation by a craneAngle more than Transportation by a forklift Storage Installation Ensure that there is adequate working space aroundUPS Clearance UnpackingPoints to be observed Anchor bolts Anchor bolt tighteningExternal Wiring Diagram OverviewTerminal Blocks and Power Cables Phase 3-wire Phase 4-wireRecommended Cable Size and Tightening Torque for 125kVA UPS Recommended Cable Size and Tightening Torque for 180kVA UPS Phase 3-wire Phase 4-wire Recommended Cable Size and Tightening Torque for 250kVA UPS Ilsco External Breakers External Breaker RatingGrounding Wire 100~225kVA 250/300kVAControl Wires 10 External ConnectionsGrounding configuration Recommended configuration with input neutral groundedGrounding configuration without input neutral Recommended configuration with delta-inputGrounding configuration with corner-grounded delta-input 12 Grounding configuration with corner-grounded delta-input
Related manuals
Manual 63 pages 16.31 Kb