1. Introduction and Installation
1.5Toner cartridge and drum unit
The included toner cartridge is a starter toner cartridge. It will print about 800
Caution:
LRead the following instructions before you begin installation. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag:
–Do not expose the drum unit to light for more than 5 minutes.
–Do not touch or scratch the green drum surface.
–Do not place the drum unit near dust or dirt, or in a high humidity area.
–Do not expose the drum unit to direct sunlight.
LDo not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life.
1Before opening the protection bag of the new toner cartridge, shake it vertically more than 5 times.
2Remove the toner cartridge and drum unit from the protection bags. Peel off the seal (1) from the toner cartridge.
1
3Place the toner cartridge (1) into the drum unit (2) vertically.
1
2
4Firmly press down the toner cartridge to snap into position.
5Turn the two levers (1) on the toner cartridge firmly.
1
6Make sure that the triangles (1) match, to install the toner cartridge correctly.
1
12