Panasonic KX-FL611AL manual Important information for Australian users, Instructions to customer

Page 6

Important information (for Australian users)

Instructions to customer

Installation

Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.

Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows:

1.Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)

2.Remove screw “B” and withdraw the plug. (See Fig. 2.)

3.Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.)

4.Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET PLUG

SCREW “A”

 

SCREW

 

“B”

 

 

Fig. 1

 

Fig. 2

TELEPHONE CORD

)

 

Connect to the PLUG

 

( as shown in Fig. 1.

SCREW “A”

SCREW

 

SOCKET

“B”

 

Fig. 3

 

Fig. 4

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

L Disconnect the Permitted Attachment and try using the service with the normal telephone.

L If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

L If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating Instructions How to use the operating instructions OpenLocation of controls Buttons Listed in alphabetical orderStation keys a Thank you for purchasing a Panasonic fax machine For your future referenceCopyright For Australian users For New Zealand usersImportant information for Australian users InstallationService difficulties Instructions to customerImportant safety instructions For best performance Recording paper Routine careIntroduction Installation Feature and navigator directoryIncluded accessories QuantityDescription of buttons Accessory informationAvailable accessories AStation keysOverview 3 4 5 9 j k lToner cartridge and drum unit Toner save feature Paper tray and paper tray coverPaper stacker To remove the paper trayDocument stacker Handset cord Recording paperCorrect ZEALAND, Change the Location Setting feature #74 on ConnectionsEXT jack Adjusting volume Help functionDate and time To select characters with the dial keypad Keypad Characters Your logoMenu Stop To enter your logo Example BillYour fax number To erase all numbers, press and hold Storing one-touch dial item Storing navigator directory itemsEditing a stored item Using one-touch dial featureUsing the navigator directory Erasing a stored itemCaller ID service How Caller ID is displayedViewing and calling back using caller information Printing the Caller ID listErasing all caller information This feature is not available in the following casesEditing a caller’s telephone number before calling back Erasing specific caller informationFor navigator directory Sending a fax manually Documents you can send Broadcast transmission Programming items into the broadcast memoryTo cancel broadcast transmission Erasing a stored item from the broadcast memoryPress Directory Program to exit Mostly phone calls Selecting the way to use your fax machineUse only as a fax With answering machineHow to receive faxes with an extension telephone Activating TEL modeHow to receive phone calls and faxes Receiving a fax manually Auto answerSetting up the fax machine and an answering machine Using the unit with an answering machineActivating FAX only mode Receiving a fax automatically Auto answer onReceiving a voice message and fax document in one call Activating the junk fax prohibitorStoring undesired callers Press Junk FAX ProhibitorFax Using with the ring detection feature More copying features Making a copyTo collate multiple copies Collated pages Uncollated pagesAdvance Settings Programming basic featuresProgramming advanced features ProgrammingBasic features Advanced features Code #58 Setting the scan contrast Code #44 Setting the memory reception alertCode #46 Setting friendly reception Code #68 Setting the Error Correction Mode ECMDirect commands for programming features Program code and direct command button#58 Scan contrast #76 Connecting tone#80 Set default 1YES #68 ECM selectionCommunication Error Code 40-42, 46-72, FF Error messages ReportsError messages Display Communication Error Code 43Directory Full Modem ErrorPolling Error Drum Life Over Replace Drum Change SuppliesToner LOW Change Supplies Transmit ErrorToner Empty Change Supplies Warm UPWhen a function does not work, check here Initial settingsGeneral Fax sending Fax receivingCopying Using an answering machine If a power failure occursReplacing the toner cartridge and the drum unit Toner LOW Toner EmptyFuser unit 3 gets hot. Do not touch it Help Has jammed in the unit When the recording paperRecording paper jam Waste disposal methodRemove the jammed paper Lift both green levers 1 forward until they stop When the recording paper is not fed into the unit properly Document jams sendingCleaning the inside of the unit Help Reference lists and reports Specifications Recording paper specifications Recording paper size Recording paper weightToner life Drum life Index Index Manufacturer Panasonic Communications Malaysia Sdn. Bhd Sales Department Panasonic Australia Pty. LimitedPanasonic New Zealand Limited Global web site PFQX2169ZA CM0305YH0 PFQX2169ZA CM0305YH0
Top Page Image Contents