Remote Operation
Skipping the greeting message
Press {0} during the greeting message playback.
LThe unit will skip the rest of the greeting message.
Turning the message transfer on or off You must program a transfer telephone number beforehand (feature #60 on page 74).
Press {8}{1} to turn on the message transfer.
Press {8}{2} to turn off the message transfer.
LIf a transfer telephone number is not programmed, you cannot turn this feature on. 6 beeps will sound.
Turning the pager call on or off You must program a pager number beforehand (feature #70 on page 54). Press {8}{3} to turn on the pager call. Press {8}{4} to turn off the pager call.
LIf a pager number is not programmed, you cannot turn this feature on. 6 beeps will sound.
Changing the receive mode
Press {8}{0} to change the receive mode from TAD/FAX to TEL.
LYou cannot return to TAD/FAX mode in the same call. To return to TAD/FAX mode, see the following.
Setting to TAD/FAX mode from TEL mode
1.Call your unit and wait for 15 rings.
LThe answering device will temporarily answer the call.
2.Enter the remote operation ID during the greeting message.
LA long beep will sound, and your unit will switch to TAD/FAX mode.
3.Hang up the handset.