Setup
Date and time, your logo and fax number
You should program the date and time, | 6 Press {SET}. |
your logo and fax number. |
This information will be printed on each page transmitted from your unit.
Setting the date and time
|
|
|
|
|
|
|
|
{MENU} | {SET} | ||
|
|
|
|
{+}
Example: TIME: 12:00AM
7 Enter the correct hour/minute by selecting 2 digits for each, using the dial keypad. Press {*} to select “AM” or “PM”.
Example: 3:15 PM
1.Press {0}{3} {1}{5}.
TIME: 03:15AM
2.Press {*} until “PM” is displayed.
TIME: 03:15PM
8 Press {SET}.
LThe next feature will be displayed.
1 Press {MENU}.
SYSTEM SET UP
2 Press {SET}.
PRESS[()]&[SET]
3 Press {<} or {>} until the following is displayed.
SET DATE & TIME
4 Press {SET}.
Example: M:01/D:01/Y:02
LThe underbar shows a position of the cursor.
5 Enter the correct month/day/year by selecting 2 digits for each, using the dial keypad.
Example: August 10, 2002
Press {0}{8} {1}{0} {0}{2}.
9 Press {MENU}.
Note:
LYou can enter the number by pressing {+} or
LThe accuracy of the clock is approximately ±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect number, and make the correction.
M:08/D:10/Y:02