1. Introduction and Installation
1.7 Ink film
The included film roll is a starter ink film.
1Open the front cover.
2Release the back cover by pushing the green button (1).
1
3Open the back cover.
4Insert the blue gear of the ink film roll into the front left slot of the unit (2) and the white gear of the ink film roll into the rear left slot of the unit (3).
L The ink film is safe to touch and will not rub off on your hands like carbon paper.
LMake sure the blue gear (2) and white gear (3) are installed as shown.
3 |
2
5Turn the blue gear (4) in the direction of the arrow until the ink film is tight (5) and at least one layer of ink film is wrapped around the blue core (6).
4
5
11