ADTRAN TA 544 user manual Snmp Menu

Page 19
NONE
GET
GET/SET

TA 544 User Manual/61200704L1-1A

Page 19 of 68

Password

When the authenticating method is password, this text string is used for the password.

Idle Time (1-255)

This sets the amount of time you can be idle before you are automatically logged off.

Level

This is the security level granted to the user.

> SNMP Menu

The TA 544 is an SNMP agent. It can respond to Gets and Sets, and can generate traps. These two lists set up the manager, communities, and levels.

Access

When set to OFF, SNMP access is denied. When set to ON (def), the TA 544 will respond to SNMP manag- ers based on the following lists.

Communities

This list is used to set up to eight SNMP communities names that the TA 544 will allow. Factory default sets the community “public” with “Get” privileges.

Name

This is a text string for the community name.

Privilege

The access for this manager can be assigned three levels.

No access is allowed for this community or man- ager.

Manager can only read items.

Manager can read and set items.

Manager IP

This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP manager can access the TA 544 for this community.

Traps

The TA 544 can generate SNMP traps. This list allows up to four managers to be listed to receive traps.

Manager Name

This is the text string describing the name of the entry. It is intended for easy reference and has no bear- ing on the SNMP trap function.

Manager IP

This is the IP address of the manager that is to receive the traps.

© 2001, ADTRAN, Inc.

TA 544 User Manual

Image 19
Contents 1200704L1 4200704L3 To the Holder of the Manual TrademarksSafety Instructions Limited Product Warranty USA International Contact Information2001, ADTRAN, Inc Repair and Return Customer Service, Product Support Information, and TrainingPresales Inquiries and Applications Support Post-Sale SupportTraining 800 615-1176, ext TrainingContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Terminal Menu Firmware UpdatesVoice Over DSL Application Mount the Unit Unpack and Inspect the UnitSystem Info Firmware Revision Bootcode RevisionPart Number Serial NumberTelnet Access System ConfigOperating Mode Network Timing ModeSnmp Menu Instructions for Changing Passwords Step Action Password ProtectMaint Port Menu Network Time System Utility Upgrade FirmwareConfig Transfer Ping Layer One Interface Configuring WAN SettingsATM Config Dslam TypeData Scrambling ATM StatsAP Receive Cells Discarded AP Receive Cell ErrorsAP Rx Cells AP Rx OAM CellsDSL Rate Config Global Configuring the Router ConfigurationUse this menu to enter static routes to other networks Bridge Security Ethernet Menu EthernetMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not Bridge Table Configuring the Router StatusSession ARP cacheConfiguring the Router Logs Clear Network LogWrap ViewCall Control Configuring Voice Support ConfigVoice Stats Configuring Voice Support StatusGateway Stats PVC StatsModules Table Managing the Modules ModulesConfiguration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 Isdn Interfaces Appendix A. Specifications and FeaturesNetwork Interface ATM SupportSerial Data Security FeaturesPower Management OptionsUpdating Firmware via a Forced Download Appendix B. Updating TA 544 Firmware using XmodemPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Status Bar Ode Avigation H elp Enu Path Left PaneRight Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Options Appendix G. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix H. RFC1483 Quick Start BridgingAppendix I. PPPoA Quick Start Guide