ADTRAN TA 544 user manual Configuring the Router Logs

Page 41

TA 544 User Manual/61200704L1-1A

Page 41 of 68

> LAN Stats

This shows traffic over the LAN interface.

> IP Stats

This shows IP traffic through the TA 544.

Configuring the Router – Logs

The ROUTER/LOGS menu (Figure 14) contains logs displaying important information about the running condition of the TA 544. The logs can be set to capture diagnostics of error conditions only by way of a log level. The levels are divided up as follows:

level 0 - Fatal event (causes reset)

level 1 - Critical event

level 2 - Error event

level 3 - Warning event

level 4 - Notify event

level 5 - Informational event

level 6 - Debugging event

Figure 14. Router/Logs Menu

> Sys log Host

Set this to the IP address or domain name (if DNS configured) of the syslog host device. All log events are sent to this device.

> PPP Log

Information pertaining to the PPP negotiation and authentication is logged in the PPP log.

> Connection Log

Information pertaining to the call placement and answering is logged in the Connection log.

© 2001, ADTRAN, Inc.

TA 544 User Manual

Image 41
Contents 1200704L1 4200704L3 To the Holder of the Manual TrademarksSafety Instructions Limited Product Warranty USA International Contact Information2001, ADTRAN, Inc Presales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingPost-Sale Support Repair and ReturnTraining 800 615-1176, ext TrainingContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Terminal Menu Firmware UpdatesVoice Over DSL Application Mount the Unit Unpack and Inspect the UnitSystem Info Part Number Bootcode RevisionSerial Number Firmware RevisionOperating Mode System ConfigNetwork Timing Mode Telnet AccessSnmp Menu Maint Port Menu Password ProtectInstructions for Changing Passwords Step Action Network Time System Utility Upgrade FirmwareConfig Transfer Ping ATM Config Configuring WAN SettingsDslam Type Layer One InterfaceData Scrambling ATM StatsAP Rx Cells AP Receive Cell ErrorsAP Rx OAM Cells AP Receive Cells DiscardedDSL Rate Config Global Configuring the Router ConfigurationUse this menu to enter static routes to other networks Bridge Security Ethernet Menu EthernetMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not Session Configuring the Router StatusARP cache Bridge TableConfiguring the Router Logs Wrap Network LogView ClearCall Control Configuring Voice Support ConfigGateway Stats Configuring Voice Support StatusPVC Stats Voice StatsModules Table Managing the Modules ModulesMode Managing the Modules V.35 SetupConfiguration Following settings are used for FRF5 Following settings are used for FRF8 Network Interface Appendix A. Specifications and FeaturesATM Support Isdn InterfacesPower Security FeaturesManagement Options Serial DataPress Enter until a menu appears Appendix B. Updating TA 544 Firmware using XmodemUpdating Firmware via a Forced Download Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Status Bar Ode Avigation H elp Enu Path Left PaneRight Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Options Appendix G. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix H. RFC1483 Quick Start BridgingAppendix I. PPPoA Quick Start Guide