ADTRAN TA 544 user manual Configuring Voice Support Status, Gateway Stats, PVC Stats, Voice Stats

Page 44

TA 544 User Manual/61200704L1-1A

Page 44 of 68

Configuring Voice Support – Status

Use the VOICE/STATUS menu to view and set the parameters shown in Figure 16.

Figure 16. Voice/Status Menu

> Gateway Stats

The GATEWAY STATS menu shows the current state of the communication link between the TA 544 and the Voice Gateway. The Gateway Link is indicated as UP or DOWN. A count of management messages is indicated along with the number of active calls in progress.

> PVC Stats

The PVC STATS menu shows the current state of the virtual circuit used between the Voice Gateway and the TA 544 IAD for voice signaling and voice payload delivery.

> Voice Stats

The POTS STATS menu shows real-time indication status of each voice port on the TA 544. From this menu, on a per port basis, the user can determine which ports are active/inactive. Several statistics at this menu are used only for in- ternal ADTRAN development. Task, Inserts, and Drops indicators are for internal use only.

> Clear Stats

The CLEAR STATS menu can be used to clear the counters used for VOICE/STATUS menus.

TA 544 User Manual

© 2001, ADTRAN, Inc.

Image 44
Contents 1200704L1 4200704L3 Trademarks To the Holder of the ManualSafety Instructions Limited Product Warranty International Contact Information USA2001, ADTRAN, Inc Customer Service, Product Support Information, and Training Presales Inquiries and Applications SupportPost-Sale Support Repair and ReturnTraining Training 800 615-1176, extContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Firmware Updates Terminal MenuVoice Over DSL Application Unpack and Inspect the Unit Mount the UnitSystem Info Bootcode Revision Part NumberSerial Number Firmware RevisionSystem Config Operating ModeNetwork Timing Mode Telnet AccessSnmp Menu Maint Port Menu Password ProtectInstructions for Changing Passwords Step Action Network Time Upgrade Firmware System UtilityConfig Transfer Ping Configuring WAN Settings ATM ConfigDslam Type Layer One InterfaceATM Stats Data ScramblingAP Receive Cell Errors AP Rx CellsAP Rx OAM Cells AP Receive Cells DiscardedDSL Rate Config Configuring the Router Configuration GlobalUse this menu to enter static routes to other networks Bridge Security Ethernet Ethernet MenuMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not Configuring the Router Status SessionARP cache Bridge TableConfiguring the Router Logs Network Log WrapView ClearConfiguring Voice Support Config Call ControlConfiguring Voice Support Status Gateway StatsPVC Stats Voice StatsManaging the Modules Modules Modules TableMode Managing the Modules V.35 SetupConfiguration Following settings are used for FRF5 Following settings are used for FRF8 Appendix A. Specifications and Features Network InterfaceATM Support Isdn InterfacesSecurity Features PowerManagement Options Serial DataPress Enter until a menu appears Appendix B. Updating TA 544 Firmware using XmodemUpdating Firmware via a Forced Download Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Enu Path Left Pane Status Bar Ode Avigation H elpWindow Pane Navigation Right Window Pane NotationAdditional Terminal Menu Window Features Navigating Using the Keyboard KeysSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Appendix G. RFC1483 Quick Start IP Routing with NAT OptionsAppendix H. RFC1483 Quick Start Bridging Bridging Step ActionAppendix I. PPPoA Quick Start Guide