TA 544 User
DIRECTION
TX AND RX (def)
TX ONLY
Allows the direction at which RIP advertise- ments are sent and listened to be specified.
RIP advertisements are periodically transmitted and are listened to on this port.
RIP advertisements are periodically transmitted but are not listened to on this port.
RX ONLY | RIP advertisements are not transmitted on |
| this port, but are listened. |
TRIGGERED | When set to YES, only IP RIP updates are sent |
| when the routing table has changed and learned |
| routes not “aged.” When set to No (def), updates |
| are sent periodically. |
RETAIN | When this Connection List entry is disconnected |
| and this parameter is set to YES, all routes |
| learned from this WAN connection are retained |
| and their routing interface is set to idle. This per- |
| mits |
| for any IP network that might have been adver- |
| tised by the particular PPP peer. The idle routes |
| can be flushed or “zombied” from the routing ta- |
| ble if a manual hangup is performed when this |
| WAN connection is not active. When this Con- |
| nection List entry is disconnected and this pa- |
| rameter is set to NO (def), routes learned from |
| this session are “zombied” and are not retained. |
PPP
Use this menu to configure PPP settings.
VJ COMPRESSION | When this item is set to ON, the TA 544 will per- |
| form TCP/IP header compression known as Van |
| Jacobson compression to the PPP peer. Normal- |
| ly, this is not necessary over ISDN connections |
| and can be set to Off (def) to disable it. |
MAX CONFIGURE | This value is the number of unanswered config- |
| |
| fore giving up on a call. The possible values are |
| 5, 10 (def), 15 and 20. |
MAX TIMER | This value is the number of seconds to wait be- |
| tween unanswered |
| possible values are 1 sec, 2 secs (def), 3 secs, 5 |
| secs and 10 secs. |
TA 544 User Manual | © 2001, ADTRAN, Inc. |