ADTRAN user manual Appendix C. Updating TA 544 Firmware using Tftp

Page 54

TA 544 User Manual/61200704L1-1A

Page 54 of 68

Appendix C. Updating TA 544 Firmware using TFTP

TA 544 supports firmware updates via the IP network using TFTP from a network server. The network server must be capable of supporting TFTP server requests from the TFTP client within the TA 544.

You must have a level 2 password to perform updates to the TA 544. Please consult the TA 544 administrator if this password is not known.

You must obtain the appropriate update file from ADTRAN Technical Support at (888) 4ADTRAN (423-8726)or call (256) 963-8000and ask for Technical Support.

You must copy the update file provided by ADTRAN to a network server that supports TFTP server requests. Record both the IP address of the server and the full path location of the update file to be downloaded.

The following materials are required:

•A PC with a Telnet client software

•A TFTP Server accessible on the local network (a TFTP Server is provided as part of the ADTRAN Utilities software)

TA 544 User Manual

© 2001, ADTRAN, Inc.

Image 54

Contents 1200704L1 4200704L3 Trademarks To the Holder of the ManualSafety Instructions Limited Product Warranty International Contact Information USA2001, ADTRAN, Inc Post-Sale Support Customer Service, Product Support Information, and TrainingPresales Inquiries and Applications Support Repair and ReturnTraining Training 800 615-1176, extContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Firmware Updates Terminal MenuVoice Over DSL Application Unpack and Inspect the Unit Mount the UnitSystem Info Serial Number Bootcode RevisionPart Number Firmware RevisionNetwork Timing Mode System ConfigOperating Mode Telnet AccessSnmp Menu Password Protect Instructions for Changing Passwords Step ActionMaint Port Menu Network Time Upgrade Firmware System UtilityConfig Transfer Ping Dslam Type Configuring WAN SettingsATM Config Layer One InterfaceATM Stats Data ScramblingAP Rx OAM Cells AP Receive Cell ErrorsAP Rx Cells AP Receive Cells DiscardedDSL Rate Config Configuring the Router Configuration GlobalUse this menu to enter static routes to other networks Bridge Security Ethernet Ethernet MenuMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not ARP cache Configuring the Router StatusSession Bridge TableConfiguring the Router Logs View Network LogWrap ClearConfiguring Voice Support Config Call ControlPVC Stats Configuring Voice Support StatusGateway Stats Voice StatsManaging the Modules Modules Modules TableManaging the Modules V.35 Setup ConfigurationMode Following settings are used for FRF5 Following settings are used for FRF8 ATM Support Appendix A. Specifications and FeaturesNetwork Interface Isdn InterfacesManagement Options Security FeaturesPower Serial DataAppendix B. Updating TA 544 Firmware using Xmodem Updating Firmware via a Forced DownloadPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Enu Path Left Pane Status Bar Ode Avigation H elpWindow Pane Navigation Right Window Pane NotationAdditional Terminal Menu Window Features Navigating Using the Keyboard KeysSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Appendix G. RFC1483 Quick Start IP Routing with NAT OptionsAppendix H. RFC1483 Quick Start Bridging Bridging Step ActionAppendix I. PPPoA Quick Start Guide