ADTRAN TA 544 user manual Network Log, Wrap, View, Clear

Page 42

TA 544 User Manual/61200704L1-1A

Page 42 of 68

> Network Log

Information pertaining to routing protocols is placed in this log.

Each log (PPP log, Connection log, and Network log) contains the following elements.

Active

When set to YES (def), PPP events below or equal the log level are logged into the log.

Wrap

When set to YES (def), new PPP events will overwrite old PPP events when the log is full. All logging will stop when the log is full and set to NO.

Level

In order to log events, they must be at or below this level. Range is 0 to 6. The default is 3.

View

This menu displays the log list. The fields are as follows:

DATE/TIME	Date and time event occurred.
LEVEL	Level associated with this event (0-6).
MESSAGE	Text message for this event. If message is too
	long to fit on the line, another event appears
	below it continuing the message.
Clear
This clears the log when activated.

TA 544 User Manual

© 2001, ADTRAN, Inc.

Image 42

Contents 1200704L1 4200704L3 Trademarks To the Holder of the ManualSafety Instructions Limited Product Warranty International Contact Information USA2001, ADTRAN, Inc Post-Sale Support Customer Service, Product Support Information, and TrainingPresales Inquiries and Applications Support Repair and ReturnTraining Training 800 615-1176, extContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Firmware Updates Terminal MenuVoice Over DSL Application Unpack and Inspect the Unit Mount the UnitSystem Info Serial Number Bootcode RevisionPart Number Firmware RevisionNetwork Timing Mode System ConfigOperating Mode Telnet AccessSnmp Menu Password Protect Instructions for Changing Passwords Step ActionMaint Port Menu Network Time Upgrade Firmware System UtilityConfig Transfer Ping Dslam Type Configuring WAN SettingsATM Config Layer One InterfaceATM Stats Data ScramblingAP Rx OAM Cells AP Receive Cell ErrorsAP Rx Cells AP Receive Cells DiscardedDSL Rate Config Configuring the Router Configuration GlobalUse this menu to enter static routes to other networks Bridge Security Ethernet Ethernet MenuMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not ARP cache Configuring the Router StatusSession Bridge TableConfiguring the Router Logs View Network LogWrap ClearConfiguring Voice Support Config Call ControlPVC Stats Configuring Voice Support StatusGateway Stats Voice StatsManaging the Modules Modules Modules TableManaging the Modules V.35 Setup ConfigurationMode Following settings are used for FRF5 Following settings are used for FRF8 ATM Support Appendix A. Specifications and FeaturesNetwork Interface Isdn InterfacesManagement Options Security FeaturesPower Serial DataAppendix B. Updating TA 544 Firmware using Xmodem Updating Firmware via a Forced DownloadPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Enu Path Left Pane Status Bar Ode Avigation H elpWindow Pane Navigation Right Window Pane NotationAdditional Terminal Menu Window Features Navigating Using the Keyboard KeysSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Appendix G. RFC1483 Quick Start IP Routing with NAT OptionsAppendix H. RFC1483 Quick Start Bridging Bridging Step ActionAppendix I. PPPoA Quick Start Guide