ADTRAN TA 544 user manual System Utility, Upgrade Firmware

Page 22

TA 544 User Manual/61200704L1-1A

Page 22 of 68

Status

This displays the current status of the time negotiation process. If an error is displayed, check all connections and configurations to try to resolve the problem.

System Utility

Use the SYSTEM UTILITY menu to view and set the system parameters shown in Figure 5.

Figure 5. System Utility Menu

> Upgrade Firmware

Updates firmware when TA 544 enhancements are released. Two transfer methods are available for use in updating the TA 544 system controller.

Transfer Method

The two methods for upgrading are XMODEM and TFTP. (See Appendix B on page 51 and Appendix C on page 54 for more information.) TFTP requires a TFTP server running somewhere on the network. The TA 544 starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting XMODEM will load the upgrade code through the CRAFT port using any PC terminal emulator with xmodem capabil- ity.

TFTP Server Address

This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is config- ured) of the TFTP server.

TFTP Server Filename

This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the upgrade code.

Transfer Status

This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success message will be displayed here.

TA 544 User Manual

© 2001, ADTRAN, Inc.

Image 22
Contents 1200704L1 4200704L3 Trademarks To the Holder of the ManualSafety Instructions Limited Product Warranty International Contact Information USA2001, ADTRAN, Inc Post-Sale Support Customer Service, Product Support Information, and TrainingPresales Inquiries and Applications Support Repair and ReturnTraining Training 800 615-1176, extContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Firmware Updates Terminal MenuVoice Over DSL Application Unpack and Inspect the Unit Mount the UnitSystem Info Serial Number Bootcode RevisionPart Number Firmware RevisionNetwork Timing Mode System ConfigOperating Mode Telnet AccessSnmp Menu Instructions for Changing Passwords Step Action Password ProtectMaint Port Menu Network Time Upgrade Firmware System UtilityConfig Transfer Ping Dslam Type Configuring WAN SettingsATM Config Layer One InterfaceATM Stats Data ScramblingAP Rx OAM Cells AP Receive Cell ErrorsAP Rx Cells AP Receive Cells DiscardedDSL Rate Config Configuring the Router Configuration GlobalUse this menu to enter static routes to other networks Bridge Security Ethernet Ethernet MenuMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not ARP cache Configuring the Router StatusSession Bridge TableConfiguring the Router Logs View Network LogWrap ClearConfiguring Voice Support Config Call ControlPVC Stats Configuring Voice Support StatusGateway Stats Voice StatsManaging the Modules Modules Modules TableConfiguration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 ATM Support Appendix A. Specifications and FeaturesNetwork Interface Isdn InterfacesManagement Options Security FeaturesPower Serial DataUpdating Firmware via a Forced Download Appendix B. Updating TA 544 Firmware using XmodemPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Enu Path Left Pane Status Bar Ode Avigation H elpWindow Pane Navigation Right Window Pane NotationAdditional Terminal Menu Window Features Navigating Using the Keyboard KeysSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Appendix G. RFC1483 Quick Start IP Routing with NAT OptionsAppendix H. RFC1483 Quick Start Bridging Bridging Step ActionAppendix I. PPPoA Quick Start Guide