TA 544 User
Page 23 of 68
Start Transfer
This activator is used when the configurable items in this menu are complete.
Before using START TRANSFER , the TA 544 should have a valid IP address, subnet mask, and default gateway (if required).
Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
TFTP Server
Setting this to YES allows another TA 544 to upgrade its code using TFTP client. This, in effect, turns on the TA 544 TFTP server function and allows its code to be “cloned.” Setting to NO (def) will deny any request from TFTP clients.
> Config Transfer
Sends a file containing the TA 544 configuration to a PC connected to the CRAFT port using XMODEM protocol or to a file on a TFTP server using the TFTP protocol. See Appendix B. Updating TA 544 Firmware using XMODEM on page 51 and Appendix C. Updating TA 544 Firmware using TFTP on page 54 for details.
CONFIG TRANSFER also lets you save the TA 544 configuration as a backup file, so you can use the same configuration with multiple TA 544 units. In addition, CONFIG TRANSFER can retrieve a configuration file from a TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with the TA 544 called TFTP Server. You can con- figure any PC running Microsoft Windows with this software, and store a configuration file.
Before using CONFIG TRANSFER , the TA 544 should have a valid IP address, subnet mask, and default gateway (if required).
Only one configuration transfer session (upload or download) can be active at a time.
Transfer Method
Displays the method used to transfer the configuration file to or from a server. XMODEM and TFTP are supported.
Transfer Type
Only BINARY transfers are currently supported.
TFTP Server IP Address
Specifies the IP address of the TFTP server. Get this number from your system administrator.
© 2001, ADTRAN, Inc. | TA 544 User Manual |