ADTRAN TA 544 user manual Appendix A. Specifications and Features, Network Interface, ATM Support

Page 49

TA 544 User Manual/61200704L1-1A

Page 49 of 68

Appendix A. Specifications and Features

Network Interface

SDSL: (2B1Q Conexant Based)

•Line Rate: 160 kbps to 2.3 Mbps

•Physical Interface: RJ-48C

•Training: Conexant Autobaud Capable

•Echo Cancellation

G.shdsl: (ITU G.991.2 Compliant)

•Line Rate: 192 kbps to 2.3 Mbps

•Physical Interface: RJ-48C

•Rate Adaptive

•Improved Spectral Compatibility

•Echo Cancellation

ATM Support

•6 PVCs (1 Voice, 5 Data)

•IP over ATM (RFC 1483)

•RFC 1483 (Multiprotocol Encapsulation over ATM), PPPoA (RFC 2364)

•Full Traffic Shaping and QoS Support

•VBR-rt and UBR Support

•F5 OAM Loopback Capability

ISDN Interfaces

•4 S0 Ports

•Physical RJ-45 Interfaces

•Line: 4-wire (Tx and Rx Pair)

•Operating Mode: Full-duplex

•Data Rate: 2B+D ISDN (B=64kbps, D=16kbps); 128 kbps available

•PS1 and PS2 Powering to power ISDN phone

Routing Capability

•Ethernet 10/100BaseT (RJ-45)

•IEEE 802.3 and 802.1D (MAC Bridging)

•IP Support: TCP, RIP V1, RIP V2, UDP,

•ICMP, ARP, UDP Relay, SYSLOG

•PPP Support: LCP, IPCP, BCP, IPXCP

•DHCP Server to LAN

•DHCP from network (NAT)

© 2001, ADTRAN, Inc.

TA 544 User Manual

Image 49

Contents 1200704L1 4200704L3 To the Holder of the Manual TrademarksSafety Instructions Limited Product Warranty USA International Contact Information2001, ADTRAN, Inc Presales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingPost-Sale Support Repair and ReturnTraining 800 615-1176, ext TrainingContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Terminal Menu Firmware UpdatesVoice Over DSL Application Mount the Unit Unpack and Inspect the UnitSystem Info Part Number Bootcode RevisionSerial Number Firmware RevisionOperating Mode System ConfigNetwork Timing Mode Telnet AccessSnmp Menu Instructions for Changing Passwords Step Action Password ProtectMaint Port Menu Network Time System Utility Upgrade FirmwareConfig Transfer Ping ATM Config Configuring WAN SettingsDslam Type Layer One InterfaceData Scrambling ATM StatsAP Rx Cells AP Receive Cell ErrorsAP Rx OAM Cells AP Receive Cells DiscardedDSL Rate Config Global Configuring the Router ConfigurationUse this menu to enter static routes to other networks Bridge Security Ethernet Menu EthernetMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not Session Configuring the Router StatusARP cache Bridge TableConfiguring the Router Logs Wrap Network LogView ClearCall Control Configuring Voice Support ConfigGateway Stats Configuring Voice Support StatusPVC Stats Voice StatsModules Table Managing the Modules ModulesConfiguration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 Network Interface Appendix A. Specifications and FeaturesATM Support Isdn InterfacesPower Security FeaturesManagement Options Serial DataUpdating Firmware via a Forced Download Appendix B. Updating TA 544 Firmware using XmodemPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Status Bar Ode Avigation H elp Enu Path Left PaneRight Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Options Appendix G. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix H. RFC1483 Quick Start BridgingAppendix I. PPPoA Quick Start Guide