Casio P460 manual Function LEDs, Starting Point After Power-up or Reset

Chapter 5 Avaya P460 Panels

Function LEDs

Figure 5.2 M460ML-SPV Function LEDs

Use the L (Left) and R (Right) pushbuttons to select the information displayed for all the port LEDs on the installed I/O modules. Press the button to cycle through the options: the illuminated LED shows the option. See “M460ML-SPV Left and Right Pushbuttons“ on page 31 for further information on the pushbuttons.

Figure 5.3 shows the cycle.

Figure 5.3 Function LEDs Cycle

Starting Point

(after Power-up or Reset)

LNK

PoECOL

Left	Right
Button	Button
LAG	Tx

Hspd Rx

FC FDX

Note: The LEDs indicate which information is displayed on the port LEDs on I/O

modules: check each I/O module to see the information.

28 Avaya P460 Installation and Maintenance Guide