5Squeeze the paper width guide, as shown and slide it to the stack of paper until it lightly touches the side of the stack. Do not push the guide too tightly against the edge
of the paper as it may cause the paper to bend.
NOTES:
•Do not push the width guide far enough to cause the material to warp.
•If you do not correctly adjust the width guide, it may cause a paper jam.
6Load paper with the print side facing up. For more information, see steps 4 and 5 on page 2.4.
2.6
Setting Up Your Printer
7To replace the tray, lower the rear edge, align it with the slot, and slide it into the printer.