9 Installing Printer
Options
Your printer is a
This chapter includes:
•Precautions When Installing Printer Options
•Installing an Optional Paper Tray
•Installing a memory DIMM
Precautions When Installing
Printer Options
DISCONNECT THE POWER CORD:
Never remove the printer control board while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option.
DISCHARGE STATIC ELECTRICITY:
The control board and internal printer option, Network Interface Cards, are sensitive to static electricity. Before installing or removing an internal option, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing installation, discharge any static electricity once again.
9.1
Installing Printer Options
Installing an Optional Paper Tray
You can increase the paper handling capacity of your printer by installing an optional Tray2. This tray holds 500 sheets of paper.
1Remove the packing tape and the packing material inside of the tray.
2Find the location of the connector and the optional tray positioners.