12Press the scroll button ( 
or 
) until you see the desired frame type and press the Enter button ( 
).
13Press the On Line/Continue button (
) to return to ready mode.
Restoring the Network Configuration
You can return the network configuration to its default settings.
1In ready mode, press the Menu button ( 
) until you see “Network” on the bottom line of the display.
2Press the Enter button ( 
) to access the menu.
3Press the scroll button (
or 
) until “Default Set” displays on the bottom line. Press the Enter button ( 
).
4
5
Press the Enter button ( 
) to confirm the selection. Reboot the network interface card.
Rebooting the Network Interface Card
If you configured the “Netware” or “Config WLAN” menu option, the printer will not recognize your change.
In this case, you can simply reboot the network interface card without turning your printer off and back on.
1In ready mode, press the Menu button ( 
) until you see
“Network” on the bottom line of the display.
2Press the Enter button ( 
) to access the menu.
3 Press the scroll button (
or 
) until “Reset Network” displays on the bottom line. Press the Enter button ( 
).
4Press the Enter button ( 
).
The printer reboots the network interface card.
8.4
Using Your Printer on a Network