CAUTION:
•Do not touch the green surface, the OPC drum, on the front of each toner cartridge with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the access door open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the access door should the installation need to be halted for any reason.
3Close the access door firmly. The printer will resume printing.
CAUTION: If the access door is not completely closed, the printer will not operate.
Inside the Printer
If paper is jammed inside the printer, a lamp turns on at the corresponding location on the Status map. Also, “Jam Inside Printer” appears on the display.
1Using the handle, completely open the access door.
3Push the levers up.
The fuser is hot!
4Open the inner cover using the handle on it and carefully take the jammed paper out of the printer.
2 Open the top cover.
7.6
Solving Problems
5Close the inner cover and push the levers down.
CAUTION:
•Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser’s operating temperature is 180°C (356°F). Take care when removing paper from the printer.
•Do not touch the green surface, the OPC drum, on the front of each toner cartridge with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the access door open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the access door should the installation need to be halted for any reason.