Samsung CLP-650 Series manual Supported Sizes of Paper, Guidelines for Using Paper, 10.2

Supported Sizes of Paper

Tray1/	Dimensions*			Weight		Capacity**
Tray2
Letter	8.5 x 11in. (216		75 to 90g/m2 bond		• 250 sheets of
	x 279mm)		(20 to 24lb) for			75g/m2 bond
			single-sided printing			paper for Tray1
A4	8.27 x 11.7in.
					• 500 sheets of
	(210 x 297mm)
						75g/m2 bond
						paper for Tray2
Multi-purpose		Dimensions*		Weight		Capacity**
Tray
Minimum Size		3.5 x 5.5in. (90 x		75 to 163g/m2		100 sheets of
(custom)		140mm)		bond (20 to		75g/m2 bond
				43lb)		paper
Maximum Size		8.5 x 14in. (216
(custom)		x 356mm)
Labels***		Same minimum		Thickness: 0.10		10 typical
		and maximum		x 0.14 mm
		paper sizes as		(0.0039 x
		listed above.		0.0055in.)
Envelopes				75 to 105g/m2		up to 10
				(20to 27lb)

*The printer supports a wide range of media sizes.

**Capacity may vary depending on media weight and thickness, and environment.

***Smoothness: 100 to 250 (Sheffield)

NOTE: You may experience jams when using print materials with a length of less than 140mm (5.5in.). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Printer and Paper Storage Environment” on page 10.3.

10.2

Specifications

Guidelines for Using Paper

For the best result, use conventional 75g/m2 (20lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the printer.

Symptom	Problem with	Solution
	Paper
Poor print quality	Too moist, too	Try another kind of
or toner	rough, too	paper, between 100 ~
adhesion,	smooth, or	250 Sheffield, 4 ~ 5%
problems with	embossed; faulty	moisture content.
feeding	paper lot
Dropout,	Stored improperly	Store paper flat in its
jamming, curl		moisture-proof
		wrapping.
Increased gray	Too heavy	Use lighter paper.
background
shading/printer
wear
Excessive curl	Too moist, wrong	Use long-grain paper.
problems with	grain direction, or
feeding	short-grain
	construction
Jamming,	Cutouts or	Do not use paper with
damage to	perforations	cutouts or
printer		perforations.
Problems with	Ragged edges	Use good quality
feeding		paper.

NOTES:

•Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (180°C or 356°F for 0.1 second).