Item | Explanation |
|
|
| This item allows you to maintain the toner |
| cartridges and other consumables. |
| • Check Others: This item allows you to view |
| the usage status of consumables. |
| Items you can check: |
| - Fuser |
Maintenance | - MP Pickroll, Tray1 Pickroll, Tray2 Pick |
roll: These items are only for service | |
| technicians. |
| • Alarm Shortage: This item determines how |
| the printer behaves when consumable items |
| run low. |
| Off: The printer does not display a warning |
| message. |
| On: The printer displays a warning message. |
|
|
PCL Menu
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.
(*: the default setting)
Item | Explanation | |
|
| |
| Values: PCL1 ~ PCL54 | |
| You can select the standard font to be used | |
| in PCL emulation. | |
| • PCL1~PCL7’s interval between letters is | |
Typeface | fixed, and PCL8~PCL44’s interval is | |
proportional to the font type and point size. | ||
| ||
| You can adjust the font size of PCL1~PCL7 | |
| using the Pitch item, and PCL8~PCL44 can | |
| do using Point Size item. | |
| PCL45~PCL54’s interval and point size are | |
| fixed. | |
|
| |
| Values: PC8 ~ PC1004 | |
Symbol | This item selects the symbol to be used in | |
| PCL emulation. The symbol is the group of | |
| numbers, marks, and special signs being | |
| used when printing letters. | |
|
|
3.7
Item | Explanation | |
|
| |
| Values: 5 ~ 128 | |
Lines | This item allows you to set vertical spacing | |
from 5 to 128 lines for the default paper | ||
| ||
| size. The default value of Lines may differ | |
| according to the paper size and printing | |
| orientation. | |
|
| |
| Values: 0.44 ~ 99.99 (0.01 unit) | |
Pitch | When you select from PCL1 to PCL7 from | |
the Typeface menu, you can determine the | ||
| font size by setting the number of | |
| characters that will print in one horizontal | |
| inch of type. The default value, 10, is the | |
| recommended size. | |
|
| |
| Values: 4.00 ~ 999.75 (0.25 unit) | |
Point Size | When you select from PCL8 to PCL44 from | |
| the Typeface menu, you can determine the | |
| font size by setting the height of the font | |
| characters. | |
|
| |
| Values: Regular, Dark | |
Courier |
| |
| This item lets you select the version of | |
| Courier font to use. | |
|
|
PostScript Menu
This menu provides you with the Print PS Error menu item.
(*: the default setting)
Item | Explanation |
|
|
| Values: Off, On |
| You can select whether or not your printer |
Print PS Error | prints an error list when a PS error occurs. |
• Select On to print PS 3 emulation errors. If | |
| an error occurs, the job stops processing, |
| the error message prints, and the printer |
| flushes the job. |
•If this menu is set to Off, the job is flushed without an indication of the error.
Using the Control Panel