Samsung CLP-650 Series Press, Contact your network, IP Conflict Printer conflicts with, Soon

Message	Status	Do this...
Press	The printer is waiting	Load a sheet of print material
Continue Button	for the user’s action	and press the On Line/
	before printing from	Continue button. You need to
	the Multi-purpose Tray	press the button for each page.
	using the manual feed
	mode.
Ready [Color]	The corresponding	Redistribute the toner in the
Low Toner	toner cartridge in your	corresponding toner cartridge,
	printer is low on toner.	referring to page 6.2.
Ready	The IP address of the	Contact your network
IP Conflict	printer conflicts with	administrator and choose an
	other devices on the	address within your subnet
	network.	which will not conflict with any
		other devices.
Rear Fan Error	A problem has	Unplug the power cord and
	occurred in the Rear	plug it in again. If the problem
	Fan of the printer.	persists, call for service.
Replace [Color]	The corresponding	If necessary, replace the
Toner	toner cartridge in your	corresponding toner cartridge
	printer is nearly	with a new one. See page 6.4.
	empty. However, the
	printer continues
	printing, even though
	print quality is not
	optimal. When the
	‘[Color] Toner Empty’
	message appears, the
	printer will stop
	printing.
Replace Fuser	The life span of the	Replace the fuser unit with a
	fuser unit has expired	new one. See page 6.7.
	and the printer will
	stop printing until a
	new fuser unit is
	placed into the printer.
Replace Fuser	The life span of the	When “Replace Fuser” message
Soon	fuser unit will expire	appears, the printer will stop
	soon.	printing. Replace the fuser unit.
Replace MP	The life span of the MP	Contact a service
Pick-roller	pickup roller has	representative.
	expired.
Replace	The life span of the	Replace the paper transfer belt
Transfer Belt	paper transfer belt has	with a new one. See page 6.5.
	expired and the
	printer will stop
	printing until a new
	paper transfer belt is
	placed into the printer.

Message	Status	Do this...
Replace	The life span of the	When the “Replace Transfer
Transfer	paper transfer belt will	Belt” message appears, the
Belt Soon	expire soon.	printer will stop printing.
		Replace the paper transfer belt.
Replace Tray1	The life span of the	Contact a service
Pick-roller	Tray1 pickup roller has	representative.
	expired.
Replace Tray2	The life span of the	Contact a service
Pick-roller	Tray2 pickup roller has	representative.
	expired.
SMPS Fan Error	A problem has	Unplug the power cord and
	occurred in the SMPS	plug it in again. If the problem
	Fan of the printer.	persists, call for service.
Tray2 Error	The optional Tray2 is	After turn the printer off and
	not properly installed	then back on, reinstall the
	or connected to the	optional Tray2. If the message
	printer.	persists, contact a service
		representative.
Tray2 Jam	The optional Tray2 jam	Close the Tray2 cover firmly.
Cover Open	cover is open.

7.16

Solving Problems