6Place the toner cartridge on a flat surface, as shown, and remove the paper covering the toner cartridge by removing the tape.
NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
7Make sure that the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place.
8Close the access door. Make sure that the door is securely latched, and then turn the printer on.
Replacing the Paper Transfer Belt
The life of the paper transfer belt is approximately 35,000 black and color pages. When the life span of the paper transfer belt has expired, the printer will stop printing until a new paper transfer belt is placed into the printer.
The SmartPanel program window appears on the computer, indicating the paper transfer belt needs to be replaced. The display on the control panel shows the error message, “Replace Transfer Belt”. At this stage, replace the paper transfer belt.
NOTE: The life span of the paper transfer belt May be affected by operating environment, printing interval, media type, and media size.
To replace the paper transfer belt:
1Turn the printer off, then wait a few minutes for the printer to cool.
2Using the handle, completely open the access door.
CAUTION:
• Do not touch the green surface, the OPC drum, on the front of each toner cartridge with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
• If you leave the access door open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the access door should the installation need to be halted for any reason.
CAUTION: If the access door is not completely closed, the printer will not operate.
6.5