Samsung manual TAM Options SF-3100T only, Options Status

Page 69

	Special Features
	TAM Options (SF-3100T only)

OPTIONS	STATUS

CHARGE SAVE	Lets you dial into your machine from a remote phone and check
	whether anyone has left a message without being charged. When
	Charge Saver is ON, the machine answers your call on the number of
	rings you have speciﬁed in the ‘Rings to Answer’ option. If there is no
	message, the machine answers on the second ring after the number of
	‘Rings to Answer’. This gives you time to hang up the phone before
	the machine answers and saves the price of the call.
	Choose ON to turn on Charge Save.
	Choose OFF to turn off Charge Save.

Message Paging	This feature allows the fax machine to transfer an incoming message to
	the speciﬁed place where you are.
	the speciﬁed place where you are.
	Choose ON to turn on the Message Paging feature, and enter the
	telephone number to which you want it transferred.		Chapter
	Choose OFF to disable it.		Chapter
	Choose OFF to disable it.

CALL	Enables you to hear callers leave messages on your machine.
MONITOR	Choose ON to turn the feature on.
	Choose OFF to turn the feature off.		6

RECORDING	You can select the maximum time allowed for caller messages. The
RECORDING
TIME	display shows you the time limit available: OFF, 30, 60, or 90 seconds.
	Choose the desired time.
	Choose the desired time.

REMOTE	You can change the three-character password used to access your
PASSWORD	machine from a remote phone. The password is preset to “#139#” at
	the factory. The ﬁrst and the last #’s are ﬁxed, but you can change the
	three middle numbers. Enter the characters you want to use.

BATTERY	You can turn on the Battery Alarm feature. With this feature on, the
ALARM	machine displays a low (or no) battery message in the LCD and sounds
	beeps to alert you of the low (or no) battery condition.
	Choose ON to turn on the Battery Alarm feature.
	Choose OFF to turn off the Battery Alarm feature.

SILENCE	In TAM mode, the machine decides the next action when silence is
CHECK	detected for ten seconds. Available suboptions are:
	- Receive: Switches to FAX Receive Mode.
	- Recording: Keeps the recording silent.
	- Disconnect: Disconnects the line and returns to Standby Mode.

HOWLER	In TAM mode, the machine decides the next action when a howling is
CHECK	detected for 9 seconds. Available suboptions are:
	ON: Disconnect the line and returns to Standby Mode.
	OFF: Disregards howling.

6-11

Image 69

Contents SF-3100/SF-3100T Electronics Important Precautions and Safety Information Case of Interference Fax Branding You should also know that Telephone Company InformationPage Table of Contents Answering Machine Care and Maintenance 1SETUP List of Features Rear View Front ViewErase ResolutionPlay AnswerScroll/Volume and ❿ SetupNumber keypad Receive Mode/ContrastSetup Press Setup SettingPress Start/Enter when ﬁnished Number NameKeypad Character Assignments How to Enter LettersPress the appropriate button for the letter you want Key Assigned numbers, letters, or charactersPress Start/Enter when the date and time appear correctly Recording TAM1 Message SF-3100T only Automatic Dialling Storing a Number for One-Touch Dial- ling One-Touch DiallingPress and hold a One-Touch button for about two seconds Enter the number you want to store up to 46 digitsPress the desired One-Touch button through Dialling a One-Touch NumberSpeed Dialling Storing a Number for Speed DiallingEnter the two-digit location number 01 through Press Start/Enter Dialling a Speed NumberPress Speed Enter a two-digit speed dial location numberGroup Storing Speed Dial Numbers for Group DiallingPress a One-Touch button you want to use for Group Dial Using Group Dialling Multi-Address transmission Automatic Dialling FAX Machine Sending a Fax Loading DocumentTurn the page face down Super Fine Setting Docu- ment Resolution and ContrastSending a Fax Manually after Talking Press Start/Enter when you hear the fax tonePick up the handset Replace the handsetSending a Fax Automatically Automatic Redial Reception Modes Receiving a FaxReceiving in FAX Mode Receiving in TEL Mode Pick up the handset and answer it when the telephone ringsHang up the handset Receiving Auto Mode Receiving in TAM Mode SF-3100 Receiving in TAM Mode SF-3100T Answer the call on the extension phone Receiving via an Extension Tele- phone Cancelling ReceptionVoice Request Pick up the handset and answer it when the phone ringsAnswering a Voice Request Making a Voice RequestFax Machine Answering Machine Recordng TAM Message SF-3100T only Checking Your TAM Greeting MessagePress OGM Monitoring an Incoming Call To Erase All Recorded Messages Erasing Old Messages You’ve HeardTo Erase a Selected Message Press ErasePlaying Back Newly Received Caller Messages Playing Back MessagesPlaying Back All Messages Simply press PlaySkipping Backward or Forward To skip backwardTo skip forward Message Paging operates as follows Message PagingPlace a call to your fax machine from a Touch- Tone phone Accessing the MachineCode Operation Using Remote CommandsAnswering Machine Advanced FAX Enter the fax number Chapter Turn the document face down and feed it into DelayedEnter the time in 24-hour format Polling Setting Send PollingSetting Receive Polling To Cancel the Scheduled Job Special Features To Redial the Number in Memory To Redial the Last Number CalledPress Redial/Pause Press and hold Redial/Pause for about two secondsHang up the handset when the person answers Using RecallTo Insert a Pause Enter the phone number to transfer it to someone elseChain Dialling User Reports To Print a report Power Fail ReportVoice Status SF-3100T only Multi-CommunicationSetting SYSTEM/TAMSF-3100T only Options Press Setup Select ‘SYSTEM SETUP’ or ‘TAM SETUP’ SFUser Options Option Suboption System Setup OptionsSpecial Features Caller ID Options Status TAM Options SF-3100T onlySetup VolumeScroll through the options by pressing or ❿! button Press Start/Enter to conﬁrmSelect what you want to delete by pressing or ❿ Clearing MemorySpecial Features Care and Maintenance Cleaning the Document Scanner Carefully wipe the Scanning Glass with a soft, dry cloth Replacing Print Cartridge Chapter Wiping the Print Nozzles and Contacts Cleaning the CartridgeGently blot and wipe the contacts and nozzles dry Re-install the Cartridge and close the Cover and PanelClean the Cartridge Carrier contacts Cleaning the Car- tridge Carrier Contacts and DeﬂectorPlug in the power cord and your fax machine will initialize Remove the Print CartridgeExamine the test pattern Cleaning the PrintheadInk Level View Be Careful Adjust ShadingPrint Cartridge Maintenance Display Meaning LCD Error MessagesProblem Solution Fax ProblemsPaper Feeding Problems Print Quality ProblemsDocument Jams During Transmission Clearing JamsIf the paper is jammed in the Received Paper Output Area Paper Jams Dur- ing PrintingIf the paper is jammed in the Paper Feed Area Remove the jammed paper as shown belowCare and Maintenance 8APPENDIX MH, MR, MMR SpeciﬁcationsPaper size Inches Paper Weight Millimeters Paper Type and Sizes for the ASF170 g/m 2 ~ 90 g/m Single Sheet Or More Sheets Acceptable Documents for ADF1Sample of ITU 4% Chart reduced to 60.5% Installation Guide JB68-00227A Rev Important Precautions and Safety Information Page Common Parts Make Sure Everything Is in the BoxFamiliarizing Yourself with Your New Machine Rear View Connection Diagram ConnectionsChoosing a Location Document Tray HandSetTelephone Line Document Exit TrayExtension Phone Optional, SF-3100 only AC Power CordBackup Battery SF-3100T only Loading Paper Pull the Paper Support on the ASF all the way upBefore loading papers, push down the blue Paper Lever Remove the new print cartridge from its packaging Installing Print CartridgeInsert the print cartridge in the carrier Press Copy Making a Copy