System Setup
In this mode, you can adjust the ringer volume, and set the home position of the contrast and resolution.
Adjusting Ringer Volume
You can adjust the volume of the ringer to the desired volume:
1.Press Menu, then press System Setup on the
2. Press Enter, then use or ¹ to choose the desired volume of the ringer.
The ringer sounds and the display shows the selected volume: HIGH; MED; LOW; OFF.
Choosing OFF turns the ringer off. The machine will work normally even if the ringer is set to off.
RINGER VOLUME
LEVEL [ LOW ]
3.Press Enter when the desired volume level is selected. The display shows the next setup menu ÔHOME SETTING ?Õ. For details on ÔHome SettingÕ menu, see below:
4.To return to Standby Mode, press Stop.
1 Getting Started
Setting Home Positions for Resolution and Contrast
The contrast and resolution lamps on the control panel can be set to their most frequently used positions. Whenever a document is loaded in your machine, the home contrast and resolution lamps will turn on. Contrast and resolution can be changed for individual operations by pressing the Contrast and Resolution buttons until the desired mode lamp is lit.
1.Press Menu, then press System Setup on the
2. Press or ¹ until you find ÔHOME SETTING?Õ.
Set Up Your Machine 1.13