Wiping the Print Cartridge Nozzles and Contacts
If print quality does not improve after repeating the nozzle test, the problem may be caused by dried ink on the:
¥Print cartridge nozzles.
¥Print cartridge contacts.
¥Print cartridge carrier contacts in the printer.
1.Remove the print cartridge. See ÒReplacing the Print CartridgeÓ on page 3.18.
2.Use a clean cloth, dampened with water only, to gently clean the entire copper coloured area, including the nozzles and contacts. To dissolve any dried ink, hold the damp cloth against the nozzles for about three seconds. Gently blot and wipe dry.
Nozzles
Contact Area
3.Allow the
If the line is still broken, clean the print cartridge carrier contacts in your machine. See page 3.16.
3 Troubleshooting
Maintenance 3.15