Controlling
Analog Picture Controls
The analog picture controls can be adjusted with the RCU. The control keys are located on the lower right side of the key panel of the RCU and indicated with the name of the control and an icon.
When an analog picture control is pressed, a text box with bar scale and the function name of the control, e.g. ‘brightness...’ appears on the screen (only if ‘TEXT’ is ON). The length of the bar scale indicates the current memorized setting for this source. The bar scale changes as the + or - buttons of the control are pressed.
Tint Control
Tint is only active for Video and
The bar scale increases when pressing on the + button and decreases when pressing the - button.
BRIGHTNESS
40
Brightness Control
A correct ‘brightness’ setting is important for good image repro- duction. Adjust the brightness with the + or - button (RCU) until the darkest parts of the picture appear black.
A bar scale gives a visual indication on the screen of the current brightness setting while pressing on the above indicated keys. If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated keys.
The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the - button (lower brightness).
Contrast Control
A correct ‘contrast’ setting is important for good image reproduc- tion. Adjust the contrast to the level you prefer, according to room lighting conditions. If the Contrast Control is too low, the picture will be too dim. If it is set too high, the picture may be too bright and not sharp. A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - buttons (RCU). If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated keys.
The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the - button (lower con- trast).
Color Saturation Control
Color saturation is only active for Video and
=and - buttons (RCU) or pushing the control disk to the left or to the right (local keypad). A bar scale gives a visual indication on the screen of the current color setting while pressing on the above indi- cated buttons. If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated buttons. The bar scale increases when pressing on the + button (richer colors) and decreases when pressing the - button (lighter colors).
Sharpness Control
Sharpness control is only active for Video and
The bar scale increases when pressing on the + button (sharper picture) and decreases when pressing on the - button (softer pic- ture).
The Pause key
When the Pause key is pressed, the image projection is muted but the projector remains with full power for immediate restart.
To restart the image :
-Press the Pause key,
-Select a source number.
GENERAL ACCESS
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Quit ADJUST
Select with 
or 
then <ENTER> <EXIT> to return
The GENERAL ACCESS MENU is available from the LOCAL KEYPAD.
Press the ADJ 3X to display.