SAFETY INSTRUCTIONS
Notice on Safety
This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No.950, which are the safety standards of information technology equipment including electrical business equipment.
These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operator against risk of electric shock and energy hazard, and having access to live parts.
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal opera- tion fails.
INSTALLATION INSTRUCTIONS
Before operating this equipment please read this manual thor- oughly, and retain it for future reference.
Installation and preliminary adjustments should be per- formed by qualified RUNCO personnel or by authorized RUNCO service dealers.
OWNER’S RECORD
The part number and serial number are located at the back side of the projector. Record these numbers in the spaces provided below. Refer to them whenever you call upon your RUNCO dealer regarding this product.
SER. NUMBER:
DEALER:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CAUTION |
| ! |
|
|
|
| RISK OF ELECTRIC SHOCK |
|
| |
|
|
|
|
|
| |
|
|
| DO NOT OPEN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| CAUTION: | TO REDUCE THE RISK OF ELECTRICAL SHOCK, |
| |||
|
| DO NOT REMOVE COVER (OR BACK) |
|
| ||
|
| NO |
| |||
|
| REFER SERVICING TO QUALIFIED PERSONNEL |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The lighting flash with an arrowhead within a triangle is intended to tell the user that parts inside this product may cause a risk of electrical shock to persons.
The exclamation point whithin a triangle is in-
!tended to tell the user that important operating and/or servicing instructions are included in the technical documentation for this equipment.
FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)
This equipment has been tested and found to comply with the lim- its of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter- ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Note:
The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022
*All the safety and operating instructions should be read before using this unit.
*The safety and operating instructions manual should be retained for future reference.
*All warnings on the equipment and in the documentation manuals should be adhered to.
*All instructions for operating and use of this equipment must be followed precisely.
On Safety
1.This product should be operated from an AC power source. This projector may be connected to an
Operating AC power voltage of the projector:
Consult your dealer to switch over from 230Vac to 120Vac or from 120Vac to 230Vac.
If you are not sure of the type of AC power available, consult your dealer or local power company.
2.This product is equipped with a
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conduc- tor AC power cable.
(If the supplied power cable is not the correct one, consult your dealer.)