Runco dtv-992/992 ultra manual Peaking, Color Select, Press Enter to display the color select menu

Random Access Adjustment Mode

Peaking

Peaking improves the contours in a projected image. Highlight PEAKING by pushing the control disc up or down and press ENTER to toggle the peaking between OFF and ON. During the creation of new settings for a RGB source the peaking is switched to OFF.

PICTURE TUNING

COLOR BALANCE

SYNC : FAST

PEAKING : OFF

Select with or <ENTER> to accept <EXIT> to return.

	RANDOM ACCESS
	ADJUSTMENT MODE
	PICTURE TUNING
Color Select	GEOMETRY
	CONVERGENCE
Highlight COLOR SELECT by pushing the control disc up or down and	COLOR SELECT
press ENTER to display the color select menu.
	COLOR SELECT

ENTER continues to the color select menu.	RED
EXIT will return to Internal Crosshatch Selection or Setup	GREEN
	BLUE
Pattern Selection Menu.	RED AND GREEN
ADJUST returns to operational mode.	BLUE AND GREEN
	RED AND BLUE
Use the control disc to highlight a color (CRT) or combination of colors to	Select with or
	<ENTER> to accept
display the projected image in that specific color.	<EXIT> to return.
To select a new color, press ENTER, the color selection menu appears.

ENTER continues to the color select menu.

EXIT will return to Internal Crosshatch Selection or Setup

Pattern Selection Menu.

ADJUST returns to operational mode.

Clamp Tuning

Highlight CLAMP TUNING by pushing the control stick forward or back- ward and press ENTER to toggle between NORMAL and RESTORATION.

Select Normal :

-for all standard sources and all sources with a bac porch > 0.8ms,

-for sources with noise and spikes in the signal.

Select Restoration

-for standard sources with a backporch between 0.4 ms and 0.8 ms,

-for sources with sync separate or sync on Green.

Port 2 : Video or S-Video

Port 2 can be used as a Video or S-Video input.

Highlight Port2 by pushing the control stick forward or backward and press ENTER to toggle between VIDEO and S-VIDEO.

PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
LINE DOUBLER : ON
Select with	or
then <ENTER>
<EXIT> to return.

PICTURE TUNING

COLOR BALANCE

PORT2 : S-VIDEO

LINE DOUBLER : ON

Select with or

then <ENTER> <EXIT> to return.

6-4