SETUP PROCEDURES
■Prior to Setup
●Turning On the Power
1.Plug the power cord into the AC outlet.
2.Turn on the power switch on the rear panel. The oper- ate LED lights up. An HDD check and a system check will be carried out while displaying respective mes- sages.
●Turning Off the Power
1.Press the [STOP] button when playing back, or [REC STOP] button when recording. Confirm that the HDD access indicator has turned off.
2.Turn off the power switch on the rear panel. The oper- ate LED goes off.
3.Press the [REC STOP] button to stop
|
|
|
| PUSH— | PAUSE SET |
HDD | STOP | PLAY | REC | REC STOP |
|
SETUP |
|
|
|
|
|
/ESC |
|
|
|
|
|
FULL | ALARM |
|
| TIME&DATE |
|
| SERCH |
|
| SEARCH |
|
ERROR |
|
|
| ALARM |
|
|
|
| RECALL |
| |
|
|
|
|
| |
| PLAY MODE SELECT |
| Digital Disk Recorder | ||
POWER
ON | SIGNAL GND |
OFF
ALARM
SUSPEND
OPERATE
RESET
Confirm that the HDD access indicator is off.
HDD | SETUP | STOP | PLAY |
| REC | REC STOP | |||
| /ESC |
|
|
|
|
|
|
|
|
FULL |
|
|
|
|
|
|
|
|
|
ALARM |
|
|
| TIME&DATE | |||||
|
|
|
| ||||||
| SERCH |
|
|
| SEARCH | ||||
ERROR | AL | |
RE | ||
| ||
| PLAY MODE SELECT |
4. Hold down the buttons of [LOCK] and [RESET] simulta- neously to suspend alarm inputs. The SUSPEND indica- tor will light up. This will prevent your setting operations from being interrupted by alarm inputs.
POWER
ON | SIGNAL GND |
OFF
ALARM | TIMER | DST | SP |
|
|
| MU |
SUSPEND | REMOTE |
|
|
OPERATE
RESET LOCK OSD SEQUE
Notes:
Note: Refer to
•Do not turn off the power while the HDD access indicator is on.
•Do not leave the recorder turned off for a long time. Supply AC power to the unit and turn it on to charge up the backup battery.
21