8Camera Control View Button (CAMERA CONTROL VIEW)
The camera control buttons appear on the bottom of the screen when you click the [CAMERA CONTROL VIEW] but- ton. These buttons enable you to adjust images of combi- nation cameras.
ZOOM (WIDE/TELE) buttons zoom the image in or out.
FOCUS (FAR/NEAR/AUTO) buttons adjust the focus of the image. When AUTO is clicked, the camera will adjust the focus by itself.
IRIS (CLOSE/OPEN/RESET) buttons adjust the iris of the image. When RESET is clicked, the iris will return to the factory default setting.
AUTO PAN (ON/OFF) buttons allow the camera to pan endlessly within the preset range.
PRESET allows the camera to turn to the preset posi- tion specified by the number.
PAN/TILT Control:
Clicking the desired direction in the image display area will move the camera if it is mounted on a pan/tilt table. The image display area is assigned panning/tilting function with the mouse click. The
UP
LEFT RIGHT
DOWN
The Camera Setup (CAM SETUP) button opens the camera setup menu and a small panel (CAMERA SETUP) having nine buttons.
The Up/Down button (↑/↓) moves the cursor up and down.
The Right/Left button (←/→) moves the cursor right and left or selects parameters.
The Enter button (ENTER) validates the selection or opens a lower layer menu.
The Escape button (ESC) returns to a higher layer.
The Reset button (RESET) opens the special menu if clicked when the cursor is on SPECIAL in the menu.
The All Reset button (ALL RESET) resets all settings of the camera to the default if clicked when the cursor is on CAMERA RESET in the special menu.
The Set & Close button (SET & CLOSE) validates the settings and closes the menu.
Note: Setup items and operating methods may vary depending on the camera. Refer to the instructions included with the connected cameras.
81