5.Select YES or NO rotating the JogDial, and press the JogDial.
YES: Carries out formatting. Wait until the process ends.
When YES is selected, the display will turn to NOW FORMATTING. It will change to HDD FORMAT → SET
DONE when formatting is completed.
NOW FORMATTING
HDD FORMAT SET DONE!
When the [STOP] button is pressed, the window returns to that of step 1.
Select RESTART to return to normal operation.
8Restarting (RESTART)
This command closes the DISK MENU, and returns to normal operation.
1. Display the DISK MENU.
DISK MENU
NO.1:XXX.XXGB
NO.2:XXX.XXGB
REMOVE LINK SET→
HDD FORMAT SET→
RESTART SET→
2. Move the cursor to RESTART.
RESTART SET→
3. Press the JogDial.
RESTART NO
4.Rotate the JogDial to select a restarting parameter.
YES: Escapes from the DISK MENU, and enters normal operation.
PLAY ONLY: Enters a special mode that prohibits recording, but allows playback.
Notes:
•The PLAY ONLY mode can be utilized when you verify a transplanted HDD removed from another disk recorder that malfunctioned.
•In normal operation after selecting the PLAY ONLY mode, "STOP (PO)" appears in the status display while camera pictures are displayed, but not in playback. "PO" stands for PLAY ONLY.
5.Press the JogDial to execute the selection, or press the [STOP] button to return to the above step 1.
A message "SET DONE!" appears, and the recorder restarts.
RESTART | SET DONE |
| |
|
|
|
|
Notes:
•Follow the procedures described above when the DISK MENU appears again after restarting. This happens when the settings have been changed.
•To cancel the PLAY ONLY mode, follow these proce- dures described above and select YES for RESTART.
98